31
8 TABLE 2: HOW TO CONVERT GAS SOURCE
Adjustment of the reduced valve flow
Burners
Flame
Converting the
cooktop from LPG
to natural gas
Converting the
Cooktop from natural
Gas to LPG
Regular burners
Full flame
Replace the burner
Nozzle according
To the guidelines in
table 1
Replace the burner
Nozzle according
to the guidelines in
table 1
Saving flame
Loosen the adjustment
Spindle (see fig.7 below )
And adjust the flame
Loosen the adjustment
Spindle (see fig.7 below )
And adjust the flame
Valve adjustment
Valve adjustment should be done with the control knob set at Burner ON saving flame position.
Remove the knob, and adjust the flame with a tiny screwdriver (see fig.7 below).
Fig.7
Checking the adjusted flame: heat the burner at full open position for 10 minutes. The turn the
knob into the saving setting. The flame should not extinguish nor move to the nozzle. If it goes off
or moves over to the nozzle, readjust the valves.
Note:
It is up to the used to request converting the appliance to another gas type if so required by
the local conditions at a licensed gas fitter/ service.
Flame selection
At the burners adjusted correctly, the flames should be light blue, and the inner cone should be
clearly visible. The size of flame depends on the position of the related burner control knob.
-Burner ON
，
large flame
-Burner ON
，
small flame
（
saving mode
）
-Burner OFF
Fig.8
See also fig.8 for various operating options(flame size selection); the burner should be set at a
large flame during the initial phase of cooking to bring the food to boiling, and then the knob
