JYTEK USB-61210 User Manual Download Page 11

Page: 11 / 56

Introduction

1 Introduction

1.1 Overview

The USB-61210 is a 16-bit high-speed USB 2.0-based DAQ module

equipped with 4 analog input channels providing simultaneous sampling

at up to 2MS/s per channel. The USB-61210 delivers high accuracy and

excellent dynamic performance at maximum sampling rates and fea

tures flexible trigger function. In addition, onboard 256MS FIFO ensures

no data loss during acquisition even with heavy loading on CPU or sys

tem.
The USB-61210 is USB bus powered and equipped with removable

screw-down terminals for easy device connectivity, and the included

multi-functional stand can be used for desktop, rail, or wall mounting.
Suitable for high-speed data acquisition, laboratory and medical

research, the USB-61210 provides a reliable measurement solution at

an affordable price.

1.2 Features



Hi-Speed USB 2.0



USB bus power



4-CH simultaneous-sampling analog input, up to 2MS/s per chan

nel



Analog and digital triggering



500VDC bus isolation



Removable screw terminal



Lockable USB cable for secure connectivity



Ready-to-use testing application (U-Test) included

1.3 Applications



Automotive testing



High-speed data acquisition



Laboratory research



Medical



I/O control

1.4 Specifications

Summary of Contents for USB-61210

























































Search results

Summary of Contents for USB-61210

Reviews:

Related manuals for USB-61210

Brands by name

Popular brands

JYTEK USB-61210, User Manual

Search results

Summary of Contents for USB-61210

Reviews:

Related manuals for USB-61210

Brands by name

Popular brands