23
Cubic W200 :
The stove must be prepared for either
top- or rear outlet. Standard construc-
tion is rear outlet.
Fasten the furnishing on the wall.
Place the stove on the lower hooks
on the furnishing, tip up the stove and
fasten it.
Assemble the stove by pushing the
steel cladding in and over the stove.
Fasten the cladding to the wall by
using 4 screws - screw holes are
located in the fire box. Repeat the
procedure for the bottom plate.
Cubic 109 :
The stove is available with top- or rear outlet. Standard construction is top outlet.
Adjusting is possible by using the 4 adjusting screws in the wood compartment.
Cubic 166 :
The stove is available with top- or rear outlet. Standard construction is top outlet.
Adjusting is possible by using the 4 adjusting screws in the wood compartment.
Cubic 215 :
The stove is available with top- or rear outlet. Standard construction is top outlet.
Adjusting is possible by using the 4 adjusting screws in the wood compartment.
Back side of stove
Summary of Contents for Athene
