JWM HI-TECH DEVELOPMENT CO LTD. www.wmkj.com.cn
JWM GUARD PATROL SYSTEM USER GUIDE
6
it means the battery is charging, when battery fully charged, red indicator turned to green.
IV. Operation Flows
- >1. Software setup
- > 2 initialize the reader by connecting with computer first
- > 3. download guard name, station name and event to the reader
- > 4. choose guard name, start to patrol
- > 5. read tags installed on places, read tags inside the event wallet if any incident happened
- > 6. download all the records to the computer via USB cable.
- > 7. use software to make a patrol analysis and statistics.
a. After software installation and setup, all the EM tags have been labeled names (checkpoint names,
personnel names or events), which are as same as being assigned in the software. Then fixing
checkpoint signal cards to the proposed positions. Make sure that, the correctly named EM tags will
be installed in the correct places of the proposed tour.
V. Notice
1. Status Indications
a. 1 vibration With 1 flash of blue indicator ------ Reading is successful
b. red indicator flashes every 3 seconds------ The battery is low and needs to be changed ASAP
c. red indicator light on means battery is charging
d. green indicator light on means battery is fully charged
e. 3 vibrations with 3 flashes of white indicator ------ There is a time error within the reader. It needs
to be connected with the computer, have its time calibration.
f. 6 vibrations with 6 flashes of while indicator ------ The reader is full, no more records can be read.
For this case, please make a full download of data to your PC and then erase the memory to reset,
now your reader will be ready for the next load cycle of 60000 new recordings.
g. 4 vibrations with 4 flashes of white indicator -----something wrong with data storage.
2. Warning
a. it is strictly forbidden buring the Reader or immersing it into liquid.
