JWM HI-TECH DEVELOPMENT CO LTD. www.wmkj.com.cn
JWM GUARD PATROL SYSTEM USER GUIDE
2
1.
Hardware quick start guide
1. Before use the equipment, you should install the software to the computer and have the initial
setup, for example: time synchronization, communication test, register tag ID number and name it
as a place name, make route, set guard name and set sending message mode etc. Then through USB
cable, download all these information to the reader.
2. After preparation work, then the patrolling guard can start patrol. He takes the reader and read his
own Guard ID to identify himself with the system
3. Then the guards go to the checkpoints, the Reader will automatically read each signal card (EM
tag) and no need touch it. When reading successfully, a flash of the red indicator light accompanied
by a “beep” means that a reading has been made. Then through download station, the patrol records
can be uploaded to control center.
2. Applicants (Tour Areas)
a.
Ideal for Security Personnel, monitoring Factories, Offices, Hotels, Car parks, Shopping centres,
Leisure park facilities and more...
b. Rounds Personnel, Cleaning rounds, Vending facilities, Amusement machines, Arcades, Care
workers, Health visitors, Outpatient visiting...
c. Service Technicians, Health & safety, Tracking Electrical safety, Fire Extinguisher checks, Safety,
Goods issue, Inventory, Asset tracking etc...
II. System Components
1. Reader
2. USB cable
4. Signal cards
(EM
tags )
5. Cylinder RFID tag
6. Guard ID key
7. Software
8. event wallet
