AM/FM/Weather band Radio w/ Dual Alarm Clock V10M10_IM_EN_06022009
www.jWIN.com
OPERATIONAL INSTRUCTIONS
Activating the Alarm
1.
To activate the alarm, set the
AL1/AL2/AL1+2
switch on side of the radio to
your desired position. The clock face icon will appear.
2.
When the alarm sounds, press the
SNOOZE
button on the top of the radio.
The alarm will sound again in seven (7) minutes.
3. Press
the
POWER
button to turn off the alarm temporarily, alarm will be
activated at next day same time.
4.
To turn the alarm off completely, set the
AL1/AL2/AL1+2
switch on side of the
radio to “OFF” position.
Radio Operation
1.
To turn on the radio by press the
POWER
button.
2.
Adjust the desired volume level by press the
/-
button, the volume
level will show on the right corner of the display.
3.
Select the preferred band (AM/FM) by pressing the
RADIO AM/FM
button.
4.
Tune manually to a radio station. The LCD will display the frequency of the
received station.
•
Manual tuning:
Press the
LEFT
“
<
”
or
RIGHT
“
>
”
buttons.
•
Auto scan:
Press and hold the
LEFT
“
<
”
or
RIGHT
“
>
”
buttons for two (2)
seconds.
5.
Adjust the antenna to get optimal effect.
6.
To turn off the radio by press the
POWER
button again.
Radio Presetting
1.
Turn on the radio and tune a station you want to store.
2. Press
the
MENU
button, the “MEMORY 01” will display on the LCD screen.
3. Press
the
UP
"
" or
DOWN
“
" button to select a station to be stored.
4. Press
the
SELECT
button to store current frequency in unit memory.
5.
Repeat above 2-4 steps to store other frequencies.
Note:
Total 20 FM frequencies and 10 AM frequencies can be stored.
Using Preset Stations
1.
Turn on the radio and change the AM of FM band pressing the
RADIO AM/FM
button.
2. Press
the
UP
"
" or
DOWN
“
" button to select the preset stations.
