background image

The CD player will skip back one track each time the Reverse Search/Skip button (

)

is pressed. If this button is pressed in the middle of a track, the CD player will skip
back to the beginning of that track. To make it skip back to the previous track press the
Reverse Search/Skip button twice.

Once the beginning of the first track is reached, the CD player will go back to the last
track.

Notes:

The Forward and Reverse Search/Skip buttons can be used to select a
desired track to play from before disc play starts. In this case the number
of the selected track will be displayed until the Play/Pause button is
pressed.

SEARCH

During playback, press and hold the Forward Search/Skip or Reverse Search/Skip button
will cause the player to scan through the current track. At the end of a track the player will
skip to the next track and continue scanning.

When the player reaches the end of the final track during Forward Search, or the beginning
of the first track during Reverse Search, it will stop scanning.

R E P E A T   D I S C   P L A Y

Use the Repeat button to listen to an entire disc, one track, or a programmed sequence
repetitively.

F

O R

 

REPEAT

 

PLAY

 

O F

 

O N E

 

TRACK

Press the Repeat button once. The Repeat (REP 1) indicator will be displayed in the CD
display.

Select the desired track by repeatedly pressing the Forward or Reverse Skip Track button .
The selected track will be shown in the CD display.

Press the Play/Pause button.

The selected track will then begin playing through to its end. At which point it will
automatically return to the beginning of that track. This will continue until the Stop button is
pressed.

If the Repeat button is pressed 2 more times during play, the repeat indicator will go off,
repeat play will end, and normal disc play will resume from that point.

F

O R

 

REPEAT

 

PLAY

 

O F

 

ALL

 

T H E

 

TRACKS

 

ON

 

T H E

 CD

Press the Repeat button twice. The Repeat (ALL) indicator will be shown on the display.

Press the Play/Pause button.

The disc will then begin playing through to the end of the last track. At which point it will
automatically return to the beginning of the first track. This will continue until the Stop button
is pressed.

If the Repeat button is pressed once more, the repeat indicator will go off, repeat play will
end, and normal disc play will resume from that point.

When the last track has finished playing, the CD player will be set to the Stop mode.

5

004AV1R.p65

2004/2/10, PM 04:07

5

Summary of Contents for JX-CD1000











Reviews: