TO SET OR RESET THE ALARM TIME
1. Press and hold the ALARM
SET/OFF
button (5).
2. While holding the ALARM
SET/OFF
button (5)
,
press the
HOUR button
(9)
and
MINUTE
button
(10)
to advance the time until the desired alarm time is shown on the display.
TO SET THE ALARM TO WAKE TO RADIO
1. Set the alarm time as previously instructed. Select a radio station and make sure the
volume level
is
set as desired.
2. Slide the ON/OFF/AUTO switch (1) to the
'
AUTO
'
position.
Set the RADIO/BUZZ switch (24) to the
RADIO position.
When the actual time matches the
selected preset alarm time, the unit automatically
turns on for 1 hour and 59 minutes and then shuts
off.
Notes :
- To shut off the alarm, press the ALARM
SET/OFF
button (5) once and alarm time will be reset for
the next day. Slide the ON/OFF/AUTO switch (1) to the OFF position to turn off alarm and not set
it for the next day.
- The
alarm
can be temporarily turned off manually by pressing the SNOOZE button
(4)
.
The radio
will turn
on
automatically 9 minutes later.
TO SET THE ALARM TO WAKE TO BUZZER
1.
Set the alarm time as previously instructed.
Set the RADIO/BUZZ switch (24) to
the
BUZZ position,
2. Slide the ON/OFF/AUTO switch (1) to the AUTO position. When the actual time matches the
preset
alarm time, the unit automatically turns on for 1 hour and 59 minutes and then shuts
off.
Notes :
-
To shut off the alarm, press the ALARM
SET/OFF
button (5) once and alarm time will be reset for
the next day. Slide the ON/OFF/AUTO switch (1) to the OFF position to turn off alarm and not set
it for the next day.
-
The alarm can be temporarily turned off manually by pressing the SNOOZE button
(4)
. T
he
buzzer
will turn on
automatically 9 minutes later.
TO SET THE
SLEEP
TIME
1. Set the ON/OFF/AUTO switch (1) to
'
OFF
'
or ‘AUTO’.
2. Press
and hold
the S
LEEP SET
button (7)
.
5
. The radio will now operate until the sleep time has elapsed or may be switched off by pressing the
S
NOOZE
/
SLEEP-
O
FF
button (4).
TO TUNR ON THE
RADIO
The AM
radio
band use
s
an inte
rnal antenna to receive a signal
. Rotate the
unit
to get the
best reception
for AM.
For FM
,
ensure that the FM
pig-tailed
antenna is completely uncoiled and extended.
1. Set the ON/OFF/AUTO switch (1) to ‘ON’ position
2. Set the
AM/FM
switch (12) to the
desired
band.
3. Adjust the
T
UNING
C
ONTROL knob
(13) to select the desired station.
4. Adju
st the
VOLUME CONTROL knob
(11).
5. To turn off the radio, set the ON/OFF/AUTO swtich (1) to ‘OFF’ position. If the radio does not
switch
off
,
this
may be caused by inadvertent operation of
the
s
leep
function.
T
o cancel
this
, press
the
S
NOOZE
/S
LEEP-
O
FF
button (4) once.
Notes: To increase the sleep time over 1 hour, p
res
s the
HOUR
button (
9
)
to set the hour
while
holding the SLEEP SET button (7). The display will be changed to 1 hour
and
59 minute
s, which is
the maximum sleep time setting. Press the MINUTE button (10) to decrease the minute.
3
. Pres
s the
MINUTE
button (
10
)
to set the minute
while holding the SLEEP SET button (7)
. The
sleep
time will decrease
from 59 minutes to zero.
4
.
Release the SLEEP SET button (7) when you finish to set the sleep time.
Notes: Pressing the SLEEP SET button (7) again after setting the sleep time will reset the sleep time to
59 minutes. In this case, you need to set the sleep time again.
