background image

Stereo Audio System for Your iPod                             

                                                                                                                        V10M10_IM_EN_10192006 

www.i-Luv.com

 

- 11 -

GETTING STARTED 

 

Setting the Clock 

1. 

To set the time, locate the 

TIME SET 

button. Press and hold the 

TIME SET

 button down until the display begins to flash. Rotate the 

SEARCH

 wheel 

until the desired time is displayed. Time is displayed in the 12-hour format. An icon to the right of the display indicates PM, but there is 

no

 AM indicator. 

2. 

To secure the time setting, press the 

TIME SET

 button again to confirm. 

3. 

To set the correct year, you may either rotate the 

SEARCH

 wheel until the present year is displayed or press the 

TIME SET

 button initially to accept the 

current setting. Press the 

TIME SET

 button again to secure year setting. 

4. 

Once the first three steps are complete, the date display will be flashing in the lower right corner of the display. Press the 

TIME SET

 button to accept 

the current setting or turn the 

SEARCH

 wheel until the current date is displayed. Press the 

TIME SET

 button to secure date setting. 

 

Setting the Alarm 

This unit supports two alarm settings for dual alarm feature. 

1. 

To set the Alarm, press and hold the 

ALARM 1

 or the 

ALARM 2

 button until the display begins to flash. Rotate the 

SEARCH

 wheel until the desired 

alarm time is displayed, an icon to the right of the time will light up indicating PM, but there is 

no

 indicator for AM.

 

2. Press 

the 

WAKE TO

 button and select the option for desired alarm sound source: iPod, radio or buzzer.

 

3. Press 

the 

ALARM 1

 or 

ALARM 2 

button to pre-set the volume level when the Alarm(s) is(are) activated. Use the 

VOLUME

 wheel to adjust the volume 

level from 10 to 40. When the Alarm(s) is(are) activated, the volume will gradually rise from low to the pre-set setting.

 

4. Press 

the 

ALARM 1

 or 

ALARM 2

 button again to exit the alarm setting mode.

 

 

Notes:  

 

With the Alarm set, the i177 is now activated to wake you up. To ensure this setting, check to see if the alarm and wake

 icons

 appear on the display. 

 

 

Take notice of the adjusted volume level and make sure it is set at an appropriate level for waking up.   

 

 

 

 

Summary of Contents for i177




















Reviews: