FACTORY SETTINGS
36
Copyright © 2012 JVL Labs All Rights Reserved
Loading Screen
Setup Button
A “Factory Reset” is a process that restores the machine to “default factory settings” (the settings
that were programmed, out of the box, when the machine was first activated).
Users will configure the various areas within Setup to suit their particular needs. These settings
can be modified at any time by entering Setup and selecting the corresponding function that is to
be amended, by Section and Tab.
A “Factory Reset” would be performed in an instance where the user would prefer to erase all
programmed settings in a particular Section/all Sections at once, and begin the Setup process
from scratch.
The following is a step-by-step process on how to perform a “Factory Reset”.
Note
: Internal access to the Echo cabinet is required.
Step 1:
Turn OFF the Echo machine by clicking the Power button in the back bottom right corner of the
machine to “
O
” (off).
Step 2:
After 5 seconds, turn the machine back ON by clicking the Power button in the back bottom right
corner of the machine to “
I
” (on).
Step 3:
A few seconds after turning the machine “On”, a “Loading Screen” will appear, and begin scanning
the system. When this Loading Screen appears, click the yellow Setup button located in the top
left corner of the machine, behind the rear cabinet door, which, after a few seconds, will trigger
the “Factory Reset Requested” main screen.
FACTORY SETTINGS
Performing A Factory Reset
Summary of Contents for HOME ECHO
Page 1: ......
