JVD DH9335, User Manual

Page: 2 / 4

Part B:
B1: “MODE/SET” button
B2: “ ” button
B3: “
/
” button
B4: “ALARM ON/OFF” button
B5: “RESET” button
B6: “SNOOZE” button
B7: Alarm mode slide switch
Part C:
C1: Wall Mount Hole
C2: Stand C3: Battery Compartment
3. Getting Started:
3.1 Main Unit:

Slide open battery compartment cover [C3]

Insert 4 x AA size batteries observing polarity *“+” and“ –“ marks+.

Replace battery compartment cover [C3]
4. Time and Alarm Setting
4.1 Radio Controlled Clock:

After batteries inserted, the clock automatically starts to scan the DCF time signal.
Radio Control Icon“ ” flashes on the LCD.
flashes,
Indicating now is receiving
DCF signal
turns on,
Indicating signal received
successfully
disappear,
Indicating signal reception
failed

The clock automatically scans the time signal at 3.00 a.m. every day to maintain
accurate timing. If reception fail, scanning stops (“ ” on LCD disappear)

The clock can be set to scan the time signal manually by holding “ ” button (B3)
for 3 seconds. Each reception takes about 5 minutes.

Stop scanning by holding “ ” button (B3) for 3 seconds.

“ ” shown on the LCD if it is in Daylight Saving Time Mode
4.2 Manual Time Setting:

In time display mode, hold “MODE” button (B1) for 3 seconds to enter
Clock/Calendar setting Mode.