Getting started
17
Getting
started
You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks to the digital input of an
amplifier, MD, etc. by using an optional digital cable (OPTICAL or COAXIAL). The digital audio signal from a disc is
directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by
using an optional digital cable, you can enjoy high-quality surround sound.
When you make the digital connection, we recommend also to make the analog connection, because, depending on
discs, no signal may be output from the DIGITAL OUT.
To connect to audio equipment with a digital input
NOTES
When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the DIGITAL AUDIO OUTPUT
setting in the PREFERENCE 2 on-screen display correctly according to the connected audio equipment. If the DIGITAL
AUDIO OUTPUT is not set correctly, loud noise may be generated from speakers, causing damage to them. See DIGITAL
AUDIO OUTPUT on page 48.
With the digital connection, the COMPRESSION settings in the PREFERENCE 2 on-screen display are invalid. Settings for
these items must be made from the decoder.
Digital equipment
Audio cable
(not supplied)
White
Red
The unit
White
Red
Coaxial digital cable
(not supplied)
Optical digital cable
(not supplied)
The OPTICAL jack is protected by the hinged cover.
To connect the optical cable to the jack, press the
cover with the plug and connect it to the jack inside
in the correct direction.
AV COMPU LINK
AUDIO
RIGHT
LEFT
IN
OPTICAL
COAXIAL
DIGITAL
IN
VIDEO OUT
AUDIO OUT
DIGITAL OUT
RIGHT
COMPONENT
S-VIDEO
Y
P
B
P
R
PCM / STREAM
COAXIAL
OPTICAL
LEFT
VIDEO
NTSC
PAL
VIDEO OUT
SELECT
6(1*ERRN 3DJH )ULGD\ -XQH $0
