Initial settings
45
Ini
tia
l s
e
tt
ing
s
English
SPEAKER SETTING
Select the speaker setting
option. Normally, simply
select “5.1 CHANNEL” or
“2 CHANNEL” according to
your speaker system.
However, if you want to
make fine tuning, select
“EXPERT”.
•
2 CHANNEL
Select this option when you connect the unit to a
stereo amplifier or TV.
•
5.1 CHANNEL
Select this option when you connect the unit to a
surround amplifier and use the front, rear, center and
sub-woofer speakers.
•
EXPERT
Select this option if you want to make fine tuning to
match your speaker system.
When selecting “EXPERT”, pressing ENTER brings up
the “EXPERT SPEAKER SETTING” display on the
remote control unit shown below, in which you can
make fine tuning for speaker settings.
See “EXPERT SPEAKER SETTING” on page 47 for
details.
MONITOR TYPE
You can select the monitor
type to match your TV
when you playback DVD
VIDEO discs recorded for
wide screen televisions.
• 4:3 LB
(Letter Box Conversion)
Select this option when you
connect a normal TV to the
unit.
When you play a wide picture
recorded on a DVD VIDEO disc,
the picture is displayed with
bands across the upper and
lower portions of the screen.
• 4:3 PS
(Pan Scan Conversion)
Select this option when you
connect a normal TV to the
unit. When you play a wide
picture recorded on a DVD
VIDEO disc, a portion of the
picture is automatically cut
off from the left and right
sides of the image. Depending on the disc, it may not
be possible to playback in this mode. In that case, the
picture is played back as in 4:3 LB
mode.
• 16:9 WIDE (Wide Television screen)
Select this option when
you connect a wide-
screen TV to the unit.
SCREEN SAVER
A television monitor screen may be burned out if a static
picture is displayed for a long time. To prevent this, the
unit automatically activates the screen saver function if a
static picture, such as an on-screen display or menu, is
displayed for over 5 minutes.
• MODE 1
The current picture gets
dark.
• MODE 2
The “screen saver” picture
appears and its brightness
changes.
• OFF
The screen saver function is off.
NOTES
• When selecting “5.1 CHANNEL” or “EXPERT”, set
“DOWN MIX” to “OFF” (see page 44).
• The Dolby Digital LFE (Low Frequency Effect) signal is
always fed from the SUBWOOFER output on the rear
panel of the unit regardless of speaker setting.
• If you connect the unit’s digital output to an external
Dolby Digital or DTS decoder (and set the “DIGITAL
AUDIO OUTPUT” to “STREAM/PCM”), the speaker
setting above is not effective. Make the speaker setting
of the external decoder appropriately.
DIGITAL AUDIO OUTPUT
STREAM / PCM
Lo / Ro
ON
EXIT
DOWN MIX
COMPRESSION
AUDIO
DISPLAY
SYSTEM
LANGUAGE
5.1 CHANNEL
SPEAKER SETTING
PRESS
KEY
F.SPK
SIZE
LEVEL
DELAY
Large
C.SPK
EXIT
Small
0 dB
0 ms
R.SPK
Small
0 dB
0 ms
BASS
S.woofer
TEST TONE
SUB WOOFER
0 dB
EXPERT SPEAKER SETTING
EXPERT SPEAKER SETTING
DISPLAY page
MONITOR TYPE
4:3 LB
MODE 2
ON
EXIT
SCREEN SAVER
ON SCREEN GUIDE
AUDIO
DISPLAY
SYSTEM
LANGUAGE
PRESS
KEY
MONITOR TYPE
4:3 LB
MODE 2
ON
EXIT
SCREEN SAVER
ON SCREEN GUIDE
AUDIO
DISPLAY
SYSTEM
LANGUAGE
PRESS
KEY
