Basic operations
26
Ba
si
c op
er
a
tio
ns
Resuming playback
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position
later
3
.
1
Set the “RESUME” setting on the “SYSTEM” page of the preference display to “ON”.
(See page 46 for details about how to set.)
2
At the position you want to interrupt playback, press
7
, or press DVD STANDBY/ON
on the remote
control or STANDBY/ON
on the front panel.
The unit memorizes the interrupted position.
• If you interrupt playback by pressing
7
in step 2 above and then turn off the power, the memory is not cleared.
¶
While the disc you interrupt playback last time is still in the disc tray.
Press
3
.
The unit starts playback from the position where you interrupted playback last time.
•
To clear the resume position memory
Carry out one of the followings.
*Take out the disc from the tray.
*Press
7
while stopped.
*Turn on the unit by pressing DVD STANDBY/ON
(on the remote control) or STANDBY/ON
(on the front panel).
To memorize the interrupted position
To resume playback
NOTES
• The resume function does not work with Audio CD discs.
• The resume function does not work if
“
RESUME” on the
“
SYSTEM” page of the preference display is set to
“
OFF”.
• In the case of a Video CD disc with PBC function, the unit may resume playback from a point slightly earlier than the resume
point you stored.
• The resume function does not work in the program or random mode.
