XR-D400SL
1-11
Note 1) The access condition of each drive is shown by an indicator.
Blinking: The disc TOC data is being read.
Lighting: The disc TOC data has been read or is being reproduced.
Note 2) The TOC data of the disc in the SOURCE disc tray (CD-ROM drive) can be displayed as follows.
When the SOURCE indicator stops blinking and starts constant lighting, press the skip button (rewind
direction) to display the number of tracks on the disc.
Examples) CTS-1000
Disc with 28 tracks: Track indicators 1 to 20 (Green) and the OVER indicator (Red) lights.
Other
Disc with 12 tracks: Track indicators 1 to 12 (Green) light.
Reproduction operation
Audio operation
Insert a disc.
Can the TOC be read?
Is playback possible?
Applicable to REC/PLAY
disc tray only.
Reproduction
operation is OK.
Check the connections of
the CN602, CN603 and
drives.
Check the drives.
Check buttons.
Check the CD-R/RW drive.
YES
YES
YES
NO
NO
NO
YES
NO
NO
During playback
Is audio output?
Audio operation is normal.
Is the audio free
from noise or
sound skip?
Is audio normal
at CN401 on
Control board?
Check the surroundings
of J401 on the IC401.
Check the 3-pin wire
connections.
Replace HQA-030A.
Replace HXL-3BSPA.
