JVC XM-EX90 Instruction Manual Download | Manualshive

Page: 2 / 60

background image

Warnings, Cautions and Others

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

CAUTION

For U.S.A.

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.

Caution –– POWER switch!
Disconnect the mains plug to shut the power off completely.
The POWER switch in any position does not disconnect the
mains line. The power can be remote controlled.

IMPORTANT FOR LASER PRODUCTS

1.
2.

3.

CLASS 1 LASER PRODUCT
DANGER: Invisible laser radiation when
open and interlock failed or defeated. Avoid
direct exposure to beam.
CAUTION: Do not open the top cover.
There are no user serviceable parts inside
the unit; leave all servicing to qualified
service personnel.

1.
2.

CAUTION

Do not remove screws, covers or cabinet.
Do not expose this appliance to rain or
moisture.

To reduce the risk of electrical shocks, fire, etc.:

G-1

XM-EX90(J)-safe5/21

98.6.4, 5:45 PM

1

«
1
2
3
4
...
»

Summary of Contents for XM-EX90





























































Reviews:

No comments

Related manuals for XM-EX90

quartz3 BPR zero

Brand: RBR Pages: 20

Brand: Olympus Pages: 45

Brand: Olympia Pages: 138

Brand: EDIC-mini Pages: 8

Brand: Bell and Howell Pages: 13

Brand: Marantz Pages: 24

Brand: forus Pages: 6

Brand: Novus Pages: 52

Brand: AGPtek Pages: 57

Brand: Daewoo Pages: 60

Brand: Oregon Scientific Pages: 1

Brand: Oregon Scientific Pages: 6

Brand: Oregon Scientific Pages: 10

Brand: Magnavox Pages: 132

Brand: UNITED Pages: 71

Brand: Panasonic Pages: 100

Brand: Panasonic Pages: 112

Brand: Teac Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands