background image

  CAUTION:         TO REDUCE THE RISK OF ELECTRIC SHOCK.
                         DO NOT REMOVE COVER (OR BACK)
                      NO USER SERVICEABLE PARTS INSIDE.
  REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, 
within an equilateral triangle is intended to 
alert the user to the presence of uninsulated 
"dangerous voltage" within the product's 
enclosure that may be of sufficient 
magnitude to constitute a risk of electric 
shock to persons.

The exclamation point within an equilateral 
triangle is intended to alert the user to the 
presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.

CAUTION

For U.S.A.

This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the 
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that 
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

WARNING: TO REDUCE THE RISK OF FIRE 
OR ELECTRIC SHOCK, DO NOT EXPOSE 
THIS APPLIANCE TO RAIN OR MOISTURE.

Caution –– POWER switch!
Disconnect the mains plug to shut the power off completely.
The POWER switch in any position does not disconnect the
mains line. The power can be remote controlled for XL-Z232BK.

IMPORTANT FOR LASER PRODUCTS

1. 
2.

3. 

CLASS 1 LASER PRODUCT
DANGER: Invisible laser radiation when 
open and interlock failed or defeated. Avoid 
direct exposure to beam.
CAUTION: Do not open the top cover. 
There are no user serviceable parts inside 
the unit; leave all servicing to qualified 
service personnel.

1. 
2. 

CAUTION

Do not remove screws, covers or cabinet.
Do not expose this appliance to rain or 
moisture.

To reduce the risk of electrical shocks, fire, etc.:

G-1

ATTENTION

Afin d’éviter tout risque d’électrocution, d’incendie, etc.:

1.

Ne pas enlever les vis ni les panneaux et ne pas
ouvrir le coffret de l’appareil.

2.

Ne pas exposer l’appareil à la pluie ni à
l’humidité.

For Canada/pour le Canada

THIS DIGITAL APPARATUS DOES NOT EXCEED THE
CLASS B LIMITS FOR RADIO NOISE EMISSIONS
FROM DIGITAL APPARATUS AS SET OUT IN THE
INTERFERENCE-CAUSING EQUIPMENT STANDARD
ENTITLED “DIGITAL APPARATUS,” ICES-003 OF THE
DEPARTMENT OF COMMUNICATIONS.

CET APPAREIL NUMERIQUE RESPECTE LES LIMITES
DE BRUITS RADIOELECTRIQUES APPLICABLES AUX
APPAREILS NUMIRIQUES DE CLASSE B PRESCRITES
DANS LA NORME SUR LE MATERIEL BROUILLEUR:
“APPAREILS NUMERIQUES”, NMB-003 EDICTEE PAR
LE MINISTRE DES COMMUNICATIONS.

1. PRODUIT LASER CLASSE 1
2. ATTENTION: Radiation laser invisible quand

l'appareil est ouvert ou que le verrouillage est en
panne ou désactivé. Eviter une exposition directe au
rayon.

3. ATTENTION: Ne pas ouvrir le couvercle du dessus.

Il n'y a aucune pièce utilisable à l'intérieur. Laisser à
un personnel qualifié le soin de réparer votre
appareil.

  

IMPORTANT POUR LES PRODUITS LASER

For Canada/pour le Canada

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY IN-
SERT.

ATTENTION: POUR EVITER LES CHOCS
ELECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQUAU FOND.

Attention –– Commutateur POWER!
Déconnecter la fiche de secteur pour couper complètement le
courant. Le commutateur POWER ne coupe jamais
complètement la ligne de secteur, quelle que soit sa position.
Le courant peut être télécommandé modèle XL-Z232BK .

Warnings, Cautions and Others/
Mises en garde, précautions et indications diverses

Summary of Contents for XL-Z132BK





















Reviews: