JVC XID8600-DS, Service Manual, Page: 35 / 56

(No.HD017<Rev.001>)1-35
5.2 Use of service mode
Besides "User mode" that is for setting this unit depending on the printing media or card used by the user, there is a "Service mode"
for status checking and changing setting of this unit during service. The checking and adjustment of the following items can be per-
formed in service mode:
(1) Fine adjustment of the printing position
(2) Printing of built-in test pattern
(3) Operation checking of various motors and sensors (4) Information display of printer
(5) Saving of setting data
(6) Setting change of user mode
For user mode, only the items that can be changed in this mode are described.
For details of other items, please refer to the instruction manual.
5.2.1 Entry into service mode
In ready condition, in preheating condition, or in error condition, press the buttons [MENU] and [Center button] simultaneously.
When the button [MENU] is released first, the printer will enter into the following service mode.
>Maintenance> >>Offset Prt Y
>>Offset Prt X
>>Offset Trf X
>>Offset Card X
>>Ink Snsr Lvl
>>Film Snsr Lvl
>>IC ContactType
>>OffsetContact
>>Vth Gain
>>Ink Eco Mode
>>B.RemedySpeed
[NEXT]
[NEXT]
[NEXT]
Vth Gain Adjustment
[0 ~15]
Select with [ ] and save with [ ].
Ink Eco Mode Setting
[On,Off]
Select with [ ] and save with [ ].
Transporting Speed Setting
[Standard,Fast]
Select with [ ] and save with [ ].
>>ISO Hico Type
>>JIS Loco Type
>>IC Antenna
[ENTER]
[EXIT]
[NEXT]
>User Mode>
[NEXT]
[NEXT]
[NEXT]
[NEXT]
[NEXT]
[NEXT]
[NEXT]
[NEXT]
[NEXT]
[NEXT]
[NEXT]
1 1
[NEXT]
>>Media
[NEXT]
>>Print
[ENTER]
[EXIT]
>>>Film Type
>>>Card Thickness
>>>YMC Level
>>>Black Level
>>>Black Mode
>>>UV Level
>>>PO Level
[ENTER]
[EXIT]
[ENTER]
[EXIT]
[NEXT]
[NEXT]
[NEXT]
[NEXT]
[NEXT]
Setting of the printing position Y
[-15(Front) ~ -1(Front),0,+1(Back) ~ +15(Back)]
Select with [ ] and save with [ ].
Setting of the printing position X
[-7(Left) ~ -1(Left),0,+1(Right) ~ +7(Right)]
Select with [ ] and save with [ ].
Setting of the retransfer position X
[-14(Left) ~ -1(Left),0,+1(Right) ~ +14(Right)]
Select with [ ] and save with [ ].
Setting of the card stop position X
[-7(Left) ~ -1(Left),0,+1(Right) ~ +7(Right)]
Select with [ ] and save with [ ].
Adjust the threshold level of the Ink-Sensor
[0 ~ 254]
Select with [ ] and save with [ ].
Adjust the threshold level of the Film-Sensor
[0 ~ 254]
Select with [ ] and save with [ ].
Select IC Contact Type
[ISO/JIS]
Select with [ ] and save with [ ].
Setting of the Offset Contact
[-15 ~ -1, 0, 1 ~ +15]
Select with [ ] and save with [ ].
Select ISO Hico Type
[Standard, Super]
Select with [ ] and save with [ ].
Select JIS Loco Type
[Standard, Overlay]
Select with [ ] and save with [ ].
Setting of IC Antenna
[None, Installed]
Select with [ ] and save with [ ].
Select the re-transfer film
[1000 ~ 750]
Select with [ ] and save with [ ].
Select the card thickness
[Standard, Thin]
Select with [ ] and save with [ ].
Setting of the YMC level
[-3 ~ -1, 0, +1 ~ +3]
Select with [ ] and save with [ ].
Setting of the black level
[-3 ~ -1, 0, +1 ~ +3]
Select with [ ] and save with [ ].
Select the black mode
[Standard, Fine]
Select with [ ] and save with [ ].
Setting of the UV ink level
[-3 ~ -1, 0, +1 ~ +3]
Select with [ ] and save with [ ].
Setting of the peel off ink level
[-3 ~ -1, 0, +1 ~ +3]
Select with [ ] and save with [ ].