8
Lens
Q
Tilt fastening screw
Note:
●
After adjusting the field angle, tighten the tilt
fastening screw to secure the camera so that
its field angle does not go out of alignment.
(
A
[READ ME FIRST])
R
Focus adjustment ring
Move the ring to the left and right to adjust the
focus.
(
A
[READ ME FIRST])
S
Zoom adjustment ring
Move the ring to the left and right to adjust the
field angle.
(
A
[READ ME FIRST])
T
[MONITOR] terminal (pin jack)
(
A
[READ ME FIRST])
U
[RESET] button
This button has two functions as described
below, depending how it is being pressed.
●
Reset function (press for less than 2 seconds
and release)
Reboots the camera. Reboot takes about 1
minute. During this interval, the [RESET]
button is disabled.
●
Focus adjust function (press for at least 2
seconds and release in less than 5 seconds)
The camera enters the focus adjust mode
and the status indicator
V
blinks in green
and orange alternately.
This function can also be used on the viewer.
Refer to [INSTRUCTIONS (Setting)].
Note:
●
During the focus adjust mode, the screen
may flicker when the electronic shutter is
operating. This is not a malfunction.
●
Pressing this button for 5 seconds or longer
switches the camera to the Service Check
mode. The status indicator lights up in orange
color in this mode. Do not press the button for
5 seconds or longer.
●
To make use of the focus adjust function of
the Reset button, restart the camera after
setting the [MONITOR OUT] output selection
switch
W
to
A
N
B
or
A
P
B
.
Name and Function of Parts
(continued)
R
T
Y
S
U
X
Q
T
W
V
U
