JVC VN-H657U Instructions Manual Download Page 74

Page: 74 / 98

Built-in Viewer Operation

The camera comes with a Built-in Viewer.

Enter the IP address of the camera in the address

bar of Internet Explorer to start up the Built-in

Viewer. The Built-in Viewer enables operations

such as saving of still images in the JPEG format

and PTZ operations.

You can operate the Pan, Tilt and Zoom

functions using a mouse.

Memo :

The first time you display the Built-in Viewer in

Internet Explorer, the Built-in Viewer will be

installed on the computer.

The settings required for running the Built-in

Viewer on the PC are stored in cookies.

Settings that are stored in cookies are

information related to the operation of the

Built-in Viewer, such as the number of the

encoder to be displayed and whether the display

size is set to a specified or variable size. Settings

related to camera operation are not stored in

cookies.

Note :

If you delete the cookies, the current viewer

settings are deleted. The next time when you

start the Built-in Viewer, the viewer will operate

in the initialized state.

List of operations

[Built-in Viewer Screen Configuration] P 74

[[Image Settings] Settings] P 76

[ [PTZ Settings] ] P 78

[ [PTZ Control] ] P 81

[[Unicast] Settings] P 84

[[Multicast] Settings] P 85

[[On Screen Display] Settings] P 86

[[Other] Settings] P 87

[Exiting Built-in Viewer] P 87

If the display or configuration of the open

window appears strange, check the

computer settings as follows:

Select [Start]-[Control Panel]-[Appearance

and Personalization].

Open [Adjust screen resolution] under

[Display].

Check that [Resolution] is set to [Monitor size

(recommended)] in use.

Otherwise, change the [Monitor size

(recommended)] setting and press the [OK]

button.

In [Display Settings], press the [Keep

changes] button.

Built-in Viewer Screen

Configuration

Memo :

Built-in Viewer settings are stored in cookies.

From this Settings screen, you can set up the

Built-in Viewer as the software on the computer.

You cannot set up camera operations from this

screen.

Some menus may not be displayed depending

on the firmware version.

For the latest firmware version, please visit our

website.

(The latest firmware version can be found on the

Download page of V.NETWORKS.)

http://www3.jvckenwood.com/english/

products-e.html

Note :

If you delete the cookies, the current viewer

settings are deleted. The next time when you

start the Built-in Viewer, the viewer will operate

in the initialized state.

* Setting values with

are default values.

MENU OFF/MENU ON

Displays or hides the operation menu.

Click [MENU ON], and the operation menu will

appear on the left of the page.

Control

Switches the Operation Menu to the Control Menu.

Click this button to adjust the [Image Settings],

[PTZ Settings] or [PTZ Control] settings.

(

P76 [[Image Settings] Settings] )

(

P78 [ [PTZ Settings] ] )

(

P81 [ [PTZ Control] ] )

Built-in Viewer Operation

Operation

Summary of Contents for VN-H657U



































































































Search results

Summary of Contents for VN-H657U

Reviews:

Related manuals for VN-H657U

Brands by name

Popular brands

JVC VN-H657U, Instructions Manual

Search results

Summary of Contents for VN-H657U

Reviews:

Related manuals for VN-H657U

Brands by name

Popular brands