[Control]
[Image Settings] Settings
Adjusts the picture quality.
This page can be used during access using
“admin” or “operator”.
0
While the Viewer Setup Menu is open, click
[Control] to switch to the Control Menu. Click
[Image Settings] to open the Settings screen.
Image Settings
.
White Balance
For selecting the white balance control feature.
9
Mode
0
ATW-Wide:
Switches to the Auto-Tracking White Balance
(automatic color temperature tracking) Wide
mode. Adjusts the white balance automatically
according to the color temperature of the light.
(Color temperature: 2500 K to 8500 K)
0
ATW-Narrow:
Switches to the Auto-Tracking White Balance
(automatic color temperature tracking) Narrow
mode. Adjusts the white balance automatically
according to the color temperature of the light.
(Color temperature: 3200 K to 8000 K)
0
ATW-Full:
The Auto-Tracking White Balance (automatic
color temperature tracking) adjusts the white
balance automatically in a wide color
temperature range according to the color
temperature of the lighting.
0
AWC:
Selects the Auto-White Balance Control (AWC)
mode.
[Set values:
R
ATW-Wide, ATW-Narrow,
ATW-Full, AWC]
9
R Gain
Sets the gain of R (red) during AWC.
0
[+] button:
Increases the redness (red level).
0
[-] button:
Decreases the redness (red level).
Memo :
0
Click the [+] or [-] button once to change to the
next value. To change the value continuously,
click repeatedly. The value will not change if the
button remains pressed down.
9
B Gain
Sets the gain of B (blue) during AWC.
0
[+] button:
Increases the blueness (blue level).
0
[-] button:
Decreases the blueness (blue level).
Memo :
0
Click the [+] or [-] button once to change to the
next value. To change the value continuously,
click repeatedly. The value will not change if the
button remains pressed down.
76
[Control] - [Image Settings] Settings
Operation
