Progressive output (High quality IP conversion)
JVC’s IP conversion technology interpolates interlace video images to improve the
quality equivalent to progressive images.
1/3 type IT CCD with 380,000 effective pixels
The high-resolution 1/3 type Interline Transfer CCD with 380,000 effective pixels
reproduces superbly detailed images in true color.
Full frame rate Motion-JPEG (VGA)
Produces high-quality images in the Motion-JPEG format with resolution of up to
640 x 480 pixels and a maximum frame rate of 30 fps.
Easy installation with PoE
(Power over Ethernet)
Simply connect with a LAN cable on the
Ethernet network and the camera is activated
and can be controlled via connected PCs.
*PoE enabled switch or power injector is required for PoE operation.
Motion detection function
Alarms can be activated based on motion within a defined area. Motion detection
can also start video recording on a connected computer.
Easy day/night function
Provides higher sensitivity under low illumination. When the Easy day/night is set to
ON, minimum illumination is 0.4lx F1.2 (25IRE).
Other Features
■
F e a t u r e s
•
Built-in Web server
•
Multicasting capability
•
FTP client/server function
•
Alarm input x 2 / output x 2
•
10Base-T/100Base-TX/FULL/HALF/
auto negotiation
•
Compatible with JVC free software "VN-RS800U"
By installing the VN-C20U’s built-in viewer on your
PC, streaming camera images can be monitored
with the Internet Explorer. Snapshot recording,
alarm signal reception, and various settings are also
possible with the viewer.
Notes:
• The VN-C20U’s built-in viewer does not have a recording function.
Viewing
Initial setup is easily achieved by Internet Explorer. Various operating
parameters can be similarly adjusted.
Enhanced Interface
DISTRIBUTED BY
Printed in Japan
VEC-0317B VNC20UKN0703
“JVC” is the trademark or registered trademark of Victor Company of Japan, Limited.
JQA-0288
All brand or product names may be trademarks and/or registered trademarks of their respective owners. Copyright © 2006, Victor Company of Japan, Limited. All Rights Reserved.
Design and specifications subject to change without notice.
Easy-to-Use, Reliable Monitoring System with
Quick Installation and Built-in Multi-Function Viewer
BF LOCK
MAC adress
U1-32
70 (2.76)
42 (1.65)
71 (2.8)
64.5 (2.54)
55 (2.17)
35 (1.38)
1/4 20UNC
148 (5.83)
138 (5.43)
41 (1.61)
1
■
Dimensions
■
Specifications
Camera
Image device
1/3 type IT CCD
Number of effective pixels
380,000 (768H x 494V)
Minimum illumination (typical)
Color mode:
2.5 lx, F1.2, AGC on, 50 IRE (50% video)
1.0 lx, F1.2, AGC on, 25 IRE (25% video)
B&W mode:
1.0 lx, F1.2, AGC on, 50 IRE (50% video), Easy day/night on
0.4 lx, F1.2, AGC on, 25 IRE (25% video), Easy day/night on
S/N ratio (typical)
50 dB, AGC off
Horizontal resolution (typical)
480 TV lines (analog video out), 400 TV lines (network)
Lens mount
C/CS
White balance
ATW/Manual
Easy day/night
Yes (on/off)
Video/Encode
Video output
Composite video signal (NTSC): 1.0 V(p-p), 75 ohms (BNC)
Video compression
JPEG (7 level compression)
Image size
VGA/QVGA
Frame rate (max.)
VGA 30 fps
<requirement>
<30 KByte, Motion detection off>
Motion detection
Yes
Constant bit rate
Yes
Pre/Post alarm buffer
Yes (8 MB)
General
Alarms
Input x 2, Output x 2
Power supply
PoE (Power over Ethernet, IEEE802.3af compliant) /AC 24 V
Power consumption
0.5 A (max.)
Operating temperature (recommended)
0
°C
to 40
°C
(32 °F to 104 °F)
Dimensions (W x H x D)
70 mm x 55 mm x 138 mm (2-7/8” x 2-5/8” x 5-7/8”)
Weight
560 g (1.24 lbs.)
Network
Network interface
RJ-45, 10Base-T/100Base-TX auto negotiation
LAN
IEEE802.3/IEEE802.3u/IEEE802.3af
Protocol
TCP/IP, UDP/IP, HTTP, FTP, ICMP, ARP, DHCP, NTP, SMTP, DSCP
IP filter (deny/allow access from specified IP)
Yes
Access protection
3 level passwords
Multicast
Yes
System Requirement (recommended)
OS
Windows
®
XP Pro (SP2)/Home (SP2)
Web browser
Internet Explorer ver. 6.0
CPU
Pentium
®
4, 1.5 GHz
Memory
1 GB
HDD space
20 MB
Display/video card
1,024 x 768 pixels, True color (24-bit or 32-bit) VRAM 256 MB
VN-C20U
LAN cable (Cat 5)
PC
Switch
•
Camera setting
Settings for camera ID, iris, AGC,
white balance, Easy day/night, etc.
•
Encoding setting
Settings for frame size, picture
quality, frame rate, etc.
•
Alarm setting
Settings for up to 5 actions when
there is an alarm.
•
Built-in viewer
Back focus adjustment ring
2
Back focus locking screw
3
AC24V power terminal
4
Alarm in/out terminal
5
Power indicator
6
Coaxial cable terminal
7
10Base-T/100Base-TX
terminal
1
3
2
4
5
6
7
■
Controls, conectors and indicators
Unit: mm (inch)
Shown with optional lens
IEEE 802.3af compliant switch
vnc20u_0316.qxd 3/16/07 1:41 PM Page 2
