13
Connection / Installation
1.
Check the mounting method of the lens to
be used before mounting
●
The default method used for this camera is
CS mount. To use a C mount lens, loosen the
back focus fastening screw using a
screwdriver, followed by turning the back
focus ring using a finger or pointed object
(e.g., screwdriver, etc.) to change the mount
method.
●
Make use of the values listed in the table
below for the dimensions of the lens mount
(a) indicated in the following diagram.
●
Objects longer than the dimension (a) must
not be used as doing so may damage the
camera interior or prevent the lens from being
properly mounted, hence resulting in
malfunctions.
2.
Turn the lens in the clockwise direction
and mount the camera firmly
3.
When using a DC iris lens, pay attention
to the pin position before connecting the
lens cable
4.
Pin Plug
Mounting the Lens
Lens
Flange Focus (b)
Dimension (a)
C Mount
Lens
17.526 mm
10 mm and
below
CS Mount
Lens
12.5 mm
5.5 mm and
below
(
a
)
(
b
)
F
Back Focus locking
screw (M2.6)
Loosen
Pin No.
DC Iris Lens
(Without Built-in EE Amplifier)
1
Damping (
-
)
2
Damping (+)
3
Driving (+)
4
Driving (
-
)
3.
2.
RESET
IRIS
3
4
2
1
1
3
2
4
VN-C20_EN.book Page 13 Tuesday, February 14, 2006 10:51 AM
