1-24 (No.MB496)
3.2.6 Removing the pickup
(See fig.7 to 11)
• Remove the DVD cover and traverse mechanism assembly.
(1) The short land section
b
of a pickup is soldered. (See fig.7)
Caution:
• Please solder to the short land section
b
of a pickup
before removing a card wire from the connector of
pickup.
If a card wire is removed without soldering, a pickup
may be destroyed by static electricity. (See fig.7 and 9)
• At the time of pickup attachment, please remove the
solder of the short land section
b
of a pickup. (See fig.7
and 9)
(2) Remove the card wire from connector of pickup. (See fig.9)
(3) From the upper surface of traverse mechanism, remove
the one screw
E
attaching the feed bracket from part
e
.
(See fig.9)
(4) A trust spring is removed from hook
f
and a trust spring is
removed in the direction of an arrow. (See fig.9)
(5) From the
g
section of a traverse mechanism assembly, the
guide shaft of a DVD pickup is moved in the direction of an
arrow, and it removes from the
h
section. (See fig.10)
(6) From the
j
section of a traverse mechanism assembly, a
pickup is removed and a pickup is removed together with a
shaft. (See fig.10)
(7) Remove the tow screws
F
attaching the lock arm and lock
arm spring. (See fig.10)
(8) Remove the shaft from pickup. (See fig.11)
Fig.9
Fig.10
Fig.11
E
f
e
Card wire
Connector
Trust spring
Trust spring
DVD pickup
Feed bracket
g
h
DVD pickup
Rod spring
Guide chaft
Traverse mechanism assembly
j
F
DVD pickup
Guide shaft
Lock arm
Lock arm spring
Summary of Contents for UX-QD70S
Page 97: ...3 25 MEMO ...
