JVC UX-QD70S Service Manual Download Page 12

Page: 12 / 99

1-12 (No.MB496)

3.1.5 Removing the fan motor

(See Figs.9 and 10)

• Remove the rear cover(B), side panels(L)/(R) and top cover

assembly.

(1) From the back side of the top cover assembly, remove the

screw

attaching the fan motor. (See Fig.9.)

(2) Take out the fan motor.

Reference:

When attaching the fan motor, pass the wire through the slot
d. (See Fig.10.)

3.1.6 Removing the tuner and tuner bracket

(See Figs.9 and 10)

• Remove the rear cover(B), side panels(L)/(R) and top cover

assembly.

(1) From the back side of the top cover assembly, remove the

two screws

attaching the tuner bracket. (See Fig.9.)

(2) From the inside of the top cover assembly, remove the

screw

attaching the tuner bracket. (See Fig.10.)

(3) Take out the tuner with the tuner bracket.

3.1.7 Removing the cassette mechanism assembly

(See Fig.10)

• Remove the rear cover(B), side panels(L)/(R) and top cover

assembly.

(1) From the inside of the top cover assembly, remove the four

screws

attaching the cassette mechanism assembly.

(2) Remove the cassette mechanism assembly.

Fig.9

Fig.10

Tuner bracket

Fan motor

Cassette mechanism assembly

Tuner

Top cover assembly

Shield

Tuner bracket

Summary of Contents for UX-QD70S




































































































Search results

Summary of Contents for UX-QD70S

Reviews:

Brands by name

Popular brands

JVC UX-QD70S, Service Manual

Search results

Summary of Contents for UX-QD70S

Reviews:

Brands by name

Popular brands