background image

English

– 17 –

Playing Back Tapes

Use only type I normal tapes.

The use of tapes longer than 120 minutes is not
recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinchrollers and
the capstans.

Loading a Tape

1 Press 

0

 EJECT to open the

tape deck door.

2 Insert a recorded tape with the open side

down and close the tape deck door.

Tape Playback

1 Press TAPE/REV.MODE.

The unit automaticaly turns on.

2 Press  

8

/

2

 or 

3

/

8

 to select

the playback direction.

Playback starts.
“PLAY” appears on the display and
the playback direction indicator
moves to show the tape direction.

3 To stop playback, press 

7

.

To interrupt playback

Press the last selected 

8

/

2

 or 

3

/

8

.

“PAUSE” appears on the display.

• If you press the button opposite to the last selected

direction, playback starts in the reverse direction.

To resume playback,

 press 

8

/

2

 or 

3

/

8

 again.

Auto Reverse

Press TAPE/REV.MODE repeatedly
to select the desired playback mode.

:

playback on one side of the tape only.

: both sides are played once.

: both sides are played repeatedly up to 10 times unless

you press 

7

.

Rewind/Fast Forward

1 Press 

4

 or 

¢

 to rewind or

fast forward the tape.

“TAPE” appears and the playback
direction indicator blinks on the display.

2 Press 

7

 to stop rewinding or fast

forwarding.

• The tape stops automatically at the end of the rewinding or

fast forwarding.

EJECT

TAPE

REV. MODE

DIRECTION

PLAY/PAUSE

STOP/CLEAR

DIRECTION

PLAY/PAUSE

SEARCH/TUNING

STOP/CLEAR

TAPE

REV. MODE

Summary of Contents for UX-M6V




























Reviews: