JVC UX-L30 Service Manual Download Page 17

Page: 17 / 73

1-17

UX-L40/UX-L30

Prior to performing the following procedure, remove
the clamper base / tray and the CD servo board.

From upside of the loading base, remove the belt
from the motor pulley.

Remove the two screws

attaching the loading

motor.

At the bottom of the body, release the three joints

outward and pull out the loading motor board from
the shaft. The loading motor comes off with the
loading board.

Unsolder the two soldered points

on the loading

motor board and remove the loading motor.

Removing the loading motor / loading
motor board (See Fig.8, 9)

When removing the loading motor board
only, unsolder the two soldering

on the

loading motor and release the three joints

REFERENCE:

Fig.8

Fig.9

Loading motor

Motor pulley

Belt

Soldering d

Loading motor board

Loading motor

Summary of Contents for UX-L30










































































Search results

Summary of Contents for UX-L30

Reviews:

Related manuals for UX-L30

Brands by name

Popular brands

JVC UX-L30, Service Manual

Search results

Summary of Contents for UX-L30

Reviews:

Related manuals for UX-L30

Brands by name

Popular brands