16
Clock Operation
Manually Setting the Clock
Manual setting the clock can only be done in Standby mode.
1. In Standby mode, press and hold SLEEP/CLOCK button.
2. Press
/ or /
button to set 12 HOUR/24 HOUR format.
3. Press the OK/ button, hour indicator will blink.
4. Press
/ or /
button to set the hour.
5. Press the OK/ button, minute indicator will blink.
6. Press
/ or /
button to set the minute.
7. Press the OK/ button to confirm.
8. Press
/ or /
button to select between SYNC-ON or SYNC-OFF for clock
synchronisation.
• To exit timer setting mode without storing, press the button.
• If no button is pressed in approx 90 seconds, the unit exits clock setting mode automatically.
• If a power failure occurs or the unit is disconnected from the mains, the clock setting will be lost.
Time Display
While the unit is in ON mode, press and hold SLEEP/CLOCK button to display the clock.
Setting the Sleep Timer
Use the sleep timer to turn the system o after a certain number of minutes in play mode. By
setting the sleep timer, you can fall asleep to music and know that your system will turn o
by itself rather than play all night.
1. While the unit is in ON mode, press SLEEP/CLOCK on the remote control repeatedly
to view the different timer settings. The number of minutes shown will display in this
sequence:
SLEEP 120
SLEEP 90
SLEEP OFF
SLEEP 15
SLEEP 30
SLEEP 60
SLEEP 45
2. The system is now set to turn off after the number of minutes you have set.
3. When the sleep timer is activated, “SLEEP” will show on the display.
4. Press SLEEP/CLOCK to show the reminding time till the unit switches off minutes and
return back to previous screen.
5. To cancel the sleep timer, press SLEEP/CLOCK repeatedly until “SLEEP OFF” shows on
the display.
UX-D327B_IB_Final200407V5.indd 16
08/04/2020 16:24
