JVC TV 20240, User Manual

Page: 13 / 36

CHANNEL SUMMARY
You can add or delete channels from
channel scanning. You can also lock
out any “unauthorized” viewers from
one or up to all 181 channels.
Press any M
ENU
Button
To CHANNEL SUMMARY
To operate
Note: Noise Muting will not work while
you are in the Channel Summary menu
.
SCAN
You can manually set channels to scan
that were too weak to be picked up
during Auto Tuner Setup. Conversely, if a
channel was too weak to receive a good
p i c t u re but was picked up anyway, delete
it by removing the
√
.
(If you have not
p e rf o rmed the Auto Tuner Setup
described in the previous column, please
do so now.)
C
H A N N E L
- / + to select the channel
To the SCAN column
To add or delete from scan
E
XIT
when finished
Note:
Channels set to scan will be
marked with an
√
.
Note: Some cable systems experience
interference from radio frequencies on
Cable Channel 95. If you like, you can
delete this channel f rom scanning by
removing the
√
I N I T I A L S E T U P
1
2
AUTO TUNER SETUP
During Auto Tuner Setup, the TV w i l l
automatically scan through all available
channels and memorize the active ones
so that when you scan, you do not pick
up weak or noisy channels.
Press any M
ENU
button
To AUTO TUNER SETUP
To operate
To choose CABLE or AIR
To move to START
To start Auto Tuner Setup
The Programming takes approximately
1 to 2 minutes
Note: Noise Muting will not work while
Auto Tuner Setup is working.
NOW
PROGRAMMING!
48
TUNER MODE : CABLE AIR
START
PROGRAMMING OVER!
Continued next page ...
NOTES:
During Initial Setup,
the TV will be
programmed to
only receive active
channels. Once the
channels are
activated by the
Auto Tuner Setup
they will be includ-
ed in Scan.
Some weak
channels may be
included or omitted
during this
procedure. You can
add or delete any
channels from
scanning in the
Channel Summary.
CH NO. SCAN CH NO. SCAN
0 1 06
√
0 2
√
07
0 3
√
08
0 4
√
09
√
0 5
√
10
√