JVC TM-2100PN, Instructions Manual

Page: 9 / 84

ENGLISH
7
PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT
– +
EXIT
< MENU >
‰
SHARPNESS : 00
COLOR TEMP. : 6500
COLOR SYSTEM : AUTO
ASPECT RATIO : 4–3
BRIGHTNESS P.S. : OFF
Menu items Purpose Setting range
SHARPNESS Picture sharpness
COLOR TEMP.
Colour temperature of
white balance
COLOR
Colour system
SYSTEM
ASPECT RATIO Aspect ratio
BRIGHTNESS Brightness Peak
P.S. Suppressor function
6500 9300
AUTO NTSC AUTO PAL
4 – 3 16 – 9
OFF ON
00 +1 +2 +3 +4 +5
Front panel Function
Contents
button displayed
+ Increases (to max. value)
3
Forwards the setting value
– Decreases (to min. value)
2
Reverses the setting value
VOLUME/
SELECT (–)
VOLUME/
SELECT (+)
Front panel Function
Contents
button displayed
PHASE ( )
▼
Forwards selection mark (
3
)
CHROMA ( )
5
Reverses selection mark (
3
)
Front panel Function
Contents
button displayed
MENU EXIT
Quits (or Releases) the
<MENU> screen
1
2
3
4
HOW TO USE THE MENU FUNCTIONS
• SHARPNESS • ASPECT RATIO
• COLOR TEMP. • BRIGHTNESS P.S.
• COLOR SYSTEM
You can set the following menu items.
Set them depending on your needs.
1. Press the MENU button.
The <MENU> screen is displayed.
MENU
2. Press the PHASE ( ) or CHROMA ( ) button
to select MENU items.
A selection mark (
3
) is put next to the selected item.
PHASE CHROMA
SHARPNESS
COLOR TEMP.
COLOR SYSTEM
ASPECT RATIO
BRIGHTNESS P.S.
3. Press the VOLUME/SELECT buttons to set.
* Normally set the COLOR SYSTEM to the AUTO mode. If reception in the AUTO mode is not good,
set it to the exclusive mode (NTSC or PAL) corresponding to the received colour system.
4. If you want to set the other menu items, repeat
procedures 2 and 3.
5. Press the MENU button to quit.
1
Selection mark (
3
): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the current
settings (value).
4
Function display: The functions of
the front panel buttons (7 buttons on
the left.) correspond to the function
displayed.
Notes:
●
BRIGHTNESS P.S. (or B.P.S.) stands
for Brightness Peak Suppressor. This
function is used to suppress (cut) the
white peak portion of the picture, so as
to reduce the picture’s burning on the
screen (cathode ray tube).
●
When the BRIGHTNESS P.S. (or B.P.S.)
function is ON, the suppressed white
peak portion (for example, the lit part of
a fluorescent lamp) seems to be blurred.
If required, lower the setting for the
B.P.S. LEVEL in the <SET- UP MENU>
screen mode, or turn off the BRIGHT-
NESS P.S. function.
●
When the screen aspect ratio is set to
16-9 (16:9) the picture will be vertically
reduced.
●
If REMOTE is displayed in the ASPECT
RATIO or BRIGHTNESS P.S. setting
values in the <MENU> screen, REMOTE
SELECT is set to “ASPT” or “B.P.S.” in the
<SET-UP MENU> screen. In this case, it
is not possible to adjust the setting ranges
for ASPECT RATIO and BRIGHTNESS
P.S. If you need to make adjustments, use
the external control function or turn off the
REMOTE SELECT setting.
<MENU> screen
<Front panel button>
Function
Contens
displayed
▼
Forwards the menu item
5
Reverses the menu item
– Lowers the adjustment
value (to the minimum)
+ Raises the adjustment
value (to the maximum)
3
Forwards the setting value
2
Reverses the setting value
EXIT Exits the <MENU> screen
DISPLAY AND SELECTION IN THE <MENU>
SCREEN MODE (SETTING)
VOLUME/SELECT
– +
MENU
LCT0053-002A-H (EN) 02.07.30, 2:46 PM 7