11
A
[SET] button
During normal screen display, pressing and holding this button
for more than 2 seconds will display the MENU screen.
(
Page 24)
During MENU screen display, this button is pressed to display
or enable the selected menu item. The input digit will change
when entering the camera title.
When selecting EXIT in the TOP MENU screen, pressing this
button will return to the normal screen.
B
[SELECTOR] button
Used when performing menu settings.
This button is a multidirectional switch.
Pressing in a vertical direction (
6
or
7
) will select the menu
item.
Pressing in a horizontal direction (
8
or
t
) will change the
set value of the item. When entering the camera title, the
input character will change.
C
[INT/ LL] Selector Switch for Synchronizing System
This switch can set a synchronizing system of the camera.
INT:
This is set for internal synchronization (INT) .
LL (Line Lock):
The camera’s vertical synchronization is locked to the AC 24V
power line frequency.
When switching between multiple cameras using a switcher,
selecting this mode and adjusting the vertical phase can re-
duce the monitor sync disturbances occurring when the cam-
era image is switched. (This cannot be used in regions where
the power frequency is 50 Hz (60 Hz) . ( ): TK-WD310E)
(INT: At time of factory shipment)
