JVC TK-T2100RE, Instructions Manual

Page: 7 / 12

7
2. Installation and Connection
2.1 Disassembling the Camera
Before you mount and adjust the camera, follow these steps to disassemble the camera.
1. Insert a coin or flat tool to the side hole and twist to remove the dome cover.
2. Set the dome cover aside.
F
IGURE
2.1 D
ISASSEMBLE THE
C
AMERA
2.2 Connecting the Wiring
Refer to Figure1.3 to connect the video connect output connector (A) and 12 VDC power connector (B).
Caution: For DC power supply use, make sure the polarity is correct to avoid malfunction and / or camera
damage.
1. Bottom case
2. Tilt adjustment bracket
3. Dome cover