background image

E-32

MODE SELECT Screen

Titles, image reversion, etc., are set.

Item

 Functions and set values

Initial value

CAMERA
TITLE EDIT

REVERSE
MODE

HLI MODE

ALM.TITLE
SIZE

ALARM
COLOUR

OFF

OFF

DOUBLE

WHITE

A L A R M

A L A RM

NORMAL

DOUBLE

Bring up the CAMERA TITLE, EDIT screen.
(

 

 Page 38)

Settings are executed for image reversion.
OFF: Image does not reverse.
R-L:

Left and right of the image are reversed.

U-D: Up and down of the image are reversed.
ALL: Up and down and left and right of the image are

reversed.

The highlighted part of the image is made black to make
the surroundings of the highlighted part better visible. Set
to HIGH when there are many highlighted parts.
[Set values: OFF, LOW, MIDDLE, HIGH]

Set the size of the characters displayed in the case of
alarms.

This sets the colour of an alarm title.
[Set values: WHITE, YELLOW, CYAN, GREEN]

 

MEMO

In the ALARM mode, the colour of camera title appears
in the ALARM COLOUR set.

MENU SETTING

E-33

Item

 Functions and set values

Initial value

AUX
TERMINAL

D.ZOOM
MAX

(B&W IN)

x2

For setting the signal input or output of the AUX terminal.

MOTION:

A signal is output if there is a change in the
area set on the MOTION DETECT screen.

B&W OUT: A signal is output when the camera switches

to B&W or Colour mode.

B&W IN:

Set to this position when inputting the B&W/
Colour switching control signal to the AUX
terminal. (

 Page 11, 30.)

 

MEMO

• In setting B&W OUT, if you use an infrared illuminator in

link motion, hunting can occur.    To  prevent this, we
recommend that you link in motion this unit and the
infrared illuminator, etc., by control signals after setting
to B&W IN.

• If the B&W item is set to AUX, the AUX TERMINAL item

changes to [B&W IN] and can not be changed.

This function sets the maximum zoom ratio of the
electronic zooming.
[Set values: x1, x2, x4, x6, x8, x10]

 

MEMO

• The electronic zoom function can only be used by the

communication command of exclusive controllers (RM-
P2580, etc.).

• Note Picture quality deteriorates under electronic

zooming as it is accompanied by digital image
processing.

• When the electronic zoom magnification ratio is

increased, there may be blurring in the upper center left
of the screen. This is a characteristic of the main unit
and is not a malfunction.

Summary of Contents for TK-C1460BE











































Reviews: