25
24
4-7 Contents of Menu Switches
4-7 Contents of Menu Switches
[ ]: Factory setting • The lower section in the items and set values columns shows what’s on the VCR’s display.
[ ]: Factory setting • The lower section in the items and set values columns shows what’s on the VCR’s display.
4 ON-SCREEN/MENU SWITCHES
4 ON-SCREEN/MENU SWITCHES
Function
Screens
Items
Set values
Function
Screens
Items
Set values
CNT TAPE END [OFF]
500
1000
..
.
9500
OFF
500
..
.
9500
Outputs a tape end signal from the rear panel’s [TAPE END OUT] terminal
when the tape reaches the set tape reel counter value during recording.
During series recording, a series recording signal is output to a connected
VCR for continuous recording.
OFF: The counter end output function is disabled.
500 : A tape end signal is output when the set tape reel counter value is
reached during recording. A buzzer sounds when the menu switch
<END BUZ> on the <BUZZER/IN OUT> is set to “ON”.
For more information on the relationship between the tape reel
counter value and the tape remaining time, refer to page 64.
SR ET 2
..
.
9500
SR ET 3
ALARM/
REC MODE
[OFF]
SENSOR
ALARM
MODE
SENSOR
ALL
OFF
ALAR
SENS
ALL
Selects the alarm recording or sensor recording function.
• Alarm recording: When an alarm signal is input to the rear panel’s
[ALARM IN] terminal during recording, the mode switches to the 3H (SP)
recording mode for realtime recording of the alarm event.
• Sensor recording: When an alarm signal is input to the rear panel’s
[ALARM IN] terminal in the Stop mode (Stop mode, Timer Recording
Standby or Operating Off mode), recording starts in the 3H (SP) mode.
OFF:
Alarm or sensor recording is not executed.
ALARM:
Alarm recording is executed.
SENSOR: Sensor recording is executed.
ALL:
Both alarm and sensor recording are executed.
AL SE 1
(VCR's display)
SR ET 1
SRI/EXT
SRI/EXT REC
[OFF]
MODE
SERIES
EXT
OFF
SERI
EIT
Selects series recording or automatic recording with an external VCR
activation signal.
OFF:
The series recording and automatic recording with an external
signal functions are disabled.
SERIES: The series recording function is enabled.
EXT:
The automatic recording function with an external signal is enabled.
* When the menu switch <REPEAT REC> is set to “ON”, externally
activated recording is not executed.
EXT REC END
[NORMAL]
OPE OFF
NORn
POFF
Selects the mode engaged when externally activated automatic
recording ends.
NORMAL: The Stop mode is engaged.
OPE OFF: The Stop mode is engaged and the operating power mode
is turned off.
Enables or disables automatic external timer recording or automatic
restart of recording after a power failure.
OFF: External timer recording or automatic recording after power
failure is disabled regardless of whether power is supplied or not.
ON: Recording starts automatically when power is turned on.
POWER ON
[OFF]
REC
ON
OFF
ON
Sets whether or not Recording Check is automatically performed at the
beginning of a tape in the Repeat Recording mode.
OFF: Automatic recording check function is disabled.
ON: Automatic recording check function is enabled.
AUTO REW
[OFF]
ON
OFF
ON
Sets whether or not the tape is rewound automatically when the tape
ends.
OFF: The tape stops at the end.
ON: The tape automatically rewinds and enters the Stop mode (auto
REW).
* When the repeat recording/playback function is set to “ON”, the
repeat function has priority.
* If the menu switch <TAPE END MODE> on the <ALARM/SENSOR
MODE> screen is set to “STOP”, the Stop mode is engaged when
the tape ends even when there is an alarm or sensor recording. The
tape does not rewind.
VTR 2
VTR 4
Enables or disables the repeat playback function.
OFF: The repeat playback function is disabled.
ON: When the tape ends, it is automatically rewound and played back
again from the beginning.
REPEAT PLAY
[OFF]
ON
OFF
ON
VTR 5
Enables or disables the repeat recording function.
OFF: The repeat recording function is disabled.
ON: When the tape ends, it is automatically rewound and recording
starts again from the beginning. When set to “ON”, the [REPEAT]
indication on the VCR’s display lights.
* If the menu switch <TAPE END MODE> on the <ALARM/SENSOR
MODE> screen is set to “STOP”, the Stop mode is engaged when
the tape ends even when there is an alarm or sensor recording. The
repeat recording is not executed.
* When this menu switch is set to “ON”, externally activated recording
is not executed.
REPEAT REC
[OFF]
ON
OFF
ON
VTR 6
AUTO REC
[OFF]
CHECK
ON
OFF
ON
VTR 3
Sets whether or not the counter memory function is activated.
OFF: The counter memory function is not activated.
ON: The counter memory function is activated.
When the tape reel counter value reaches 0000 in the FF/REW
mode, the VCR enters the Stop mode automatically.
* The counter memory function is not available during repeat recording/
playback, auto REW, alarm search, alarm scan and date/time search.
VTR MODE
CNT MEM SW
[OFF]
ON
OFF
ON
VTR 1
DURATION
5 SEC
10 SEC
15 SEC
30 SEC
60 SEC
120 SEC
[180 SEC]
TAPE END
MANUAL
5
..
.
180
TPEN
nANU
AL SE 2
Selects the recording duration for alarm or sensor recording.
5 — 180 SEC: Alarm or sensor recording is performed for the specified
time (5 sec. to 180 sec.)
TAPE END: Alarm or sensor recording continues to the end of the tape.
MANUAL:
Alarm or sensor recording continues for as long as alarm
signals are input. Set to this position when specifying the
alarm recording time with a switcher.
*To ensure accurate alarm search and alarm scan operation,
be sure to set the recording time to 5 seconds or more.
