background image

10

GB

Preparation

Battery Replacement for the Remote Control

1.  Press and slide the back cover to open the 

battery compartment of the remote control.

2.  Insert two AAA size batteries. Make sure the 

(+) and ( – ) ends of the batteries match the 

(+) and ( – ) ends indicated in the battery 

compartment.

Handling the Battery
•  Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause fire, 

personal injury or damage to property.

•  Only use the battery type indicated in this manual.
•  Do not install new batteries with used ones and do not mix different types of batteries.
•  Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local 

regulations.

Handling the Remote Control
•  Do not drop the remote control.
•  Do not allow anything to impact the remote control.
•  Do not spill water or any liquid on the remote control.
•  Do not place the remote control on a wet object.
•  Do not place the remote control under direct sunlight or near sources of excessive heat.
•  Remove the battery from the remote control when not in use for a long period of time, as corrosion or 

battery leakage may occur and result in physical injury, and / or property damage, and / or fire.

•  When the battery is exhausted, the remote control will not function. 

3.  Close the battery compartment cover.

Remote Control Operation Range

•  The remote control sensor on the front unit is 

sensitive to the remote control’s commands up 

to a maximum of 5 metres away and within a 

maximum of a 60° arc.

•  Please note that the operating distance may 

vary depending on the brightness of the room.

30°

30°

Max. 5 m

TH-WT301B_IB_140617_Annie.indd   10

17/6/14   3:34 pm

Summary of Contents for TH-WT301B





























Reviews: