1-32 (No.MB112)
3.4
Satellite speaker section
• Before disassembling the main body, lay down it first.
3.4.1
Removing the cabinet assembly
(See Figs.1 and 2)
(1) From the bottom side of the main body, remove the four
screws
A
attaching the stand assembly. (See Fig.1.)
CAUTION:
The speaker wire assembly is connected with the
speaker terminals at this time. Be careful not to damage
the speaker terminal and the speaker wire.
(2) From the top side of the stand assembly, disconnect the
speaker wire assembly on the speaker terminals. (See
Fig.2.)
(3) Remove the seven hooks a attaching the net assembly to
the cabinet assembly. (See Fig.2.)
CAUTION:
When removing the net assembly, be careful not to
damage the speakers and the cabinet assembly.
Reference:
• As the net assembly is fixed with the adhesive and the
two-sided tape, remove the net assembly by using a
minus driver or similar tool.
• Attach the net assembly after applying the adhesive to
the hooks
a
.
(4) Remove the two screws
B
and screw
C
. (See Fig.2.)
(5) Pull out the stand from the cabinet assembly while peeling
off the adhesive section
b
. (See Fig.2.)
Fig.1
Fig.2
Stand assembly
A
A
B
C
Adhesive
section
b
Stand
Cabinet assembly
Net assembly
Speaker wire assembly
Stand assembly
Speaker terminal
Speaker terminal
Hooks
a
Hooks
a
Hooks
a
