(No.MB713<Rev.002>)1-19
3.2
DVD mechanism
3.2.1
Main base (See Fig.1)
(1) Place the disc clamp assembly as Fig.1.
(2) Lift up the disc clamp assembly in direction of the arrow (A).
(3) Separate the disc clamp assembly from the Clamp holder.
(4) Turn the Clamper plate to counterclockwise direction and
then lift up the clamper plate.
Fig.1
3.2.2
Disc tray (See Fig.2)
(1) Insert and push a screwdriver in the emergency eject hole
(A) at the right side, or put the screwdriver on the lever (B)
of the emergency gear and pull the lever (B) in direction of
arrow so that the Disc tray is ejected about 15 ~ 20 mm.
(2) Pull the Disc tray until it is separated from the Main base
completely.
Fig.2
3.2.3
Slide base assembly (See Fig.3)
(1) Release the four screws (S2).
(2) Disconnect the FFC connector (C1).
(3) Release the screw (S3).
Fig.3
3.2.4
Up/Down frame assembly (See Fig.4)
NOTE:
Put the Main base face down (Bottom side)
(1) Release the screw (S4).
(2) Unlock the Locking tab (L3) in direction of arrow and then
lift up the Up/down frame assembly to separate it from
the Main base.
NOTE:
When reassembling move the Up/Down guide in direction of
arrow (C) until it is positioned as Fig (C).
When reassembling insert (A) position of the Up/down frame
assembly in the (B) position of the Up/down frame assembly
as Fig (B).
3.2.5
Pulley gear (See Fig.4)
(1) Unlock the locking tab (L4) in direction of arrow (B) and
then separate the pulley gear from the main base.
3.2.6
Up/down guide (See Fig.4)
(1) Move the Up/down guide in direction of arrow (A) as Fig
(A).
(2) Push the locking tab (L5) down and then lift up the Up/down
guide to separate it from the main base.
NOTE:
When reassembling place the Up/down guide as Fig (C) and
move it direction arrow (B) until it is locked by the locking tab
(L5). And confirm the Up/down guide as Fig (A).
Main base
Clamper plate
Magnet clamp
Upper clamp
Clamp holder
Main base
(Fig.
A)
Disc clamp assembly
(A)
Disc tray
Main base
Lever
Main base
BOTTOM SIDE VIEW
(B)
Pickup base
Distinguish upper and
lower sides
(Assemble with care)
Rubber damper
Rubber damper
Rubber damper
Reck gear
General pickup assembly
Spindle motor assembly
(S2)
(S2)
(S2)
(S2)
(S3)
(C1)
