(No.MB108)1-21
3.4.6 Removing the power amplifier board (A)
(See Figs.8 and 9)
• Prior to performing the following procedures, remove the am-
plifier assembly, rear panel, SP terminal board, mother board
assembly and mother board.
(1) Remove the three screws
J
attaching the heat sink to the
power amplifier board (A). (See Fig.8)
(2) From the bottom side of the power amplifier board (A), dis-
engage the four sections
b
of the engagement. (See Fig.9)
(3) From the top side of the power amplifier board (A), disen-
gage the section
c
of the engagement to the direction of the
arrow. (See Fig.9)
(4) Remove the power amplifier board (A) from the P.TR hold-
er (A).
3.4.7 Removing the power amplifier board (B)
(See Figs.8 and 10)
• Prior to performing the following procedures, remove the am-
plifier assembly, rear panel, SP terminal board, mother board
assembly and mother board.
(1) Remove the three screws
K
attaching the heat sink to the
power amplifier board (B). (See Fig.8)
(2) From the bottom side of the power amplifier board (B), dis-
engage the four sections
c
of the engagement. (See Fig.9)
(3) From the top side of the power amplifier board (B), disen-
gage the section
d
of the engagement to the direction of the
arrow. (See Fig.9)
(4) Remove the power amplifier board (B) from the P.TR hold-
er (B).
Fig.8
Fig.9
Fig.10
Power
amplifier
board (A)
Power
amplifier
board (B)
P.TR holder (B)
P.TR holder (A)
Heat sink
J
K
K
2
1
(Bottom side)
(Bottom side)
2
1
P.TR holder (A)
CN252
CN251
Power amplifier
board (A)
Section
c
Sections
b
Sections
b
2
1
(Bottom side)
1
2
(Bottom side)
CN352
CN351
Power amplifier
board (B)
P.TR holder (B)
Section
e
Sections
d
Sections
d