JVC TH-A30, Service Manual

Page: 11 / 67

1-11
TH-A30
Remove the six bosses and remove the front panel.
Notes: It will be good to use the tool with a flat tip, since it
is hard to remove. Please take care not to damage the
cabinet at this time.
1.
Removing the front panel
(See Fig.1 and 2)
Removing the speaker unit
(See Fig.3 to 5)
<Speaker section>
[SP-WA30 / Subwoofer]
[SP-XA30 / Satellite speaker]
[SP-XSA30 / Rear satellite speaker]
It is exchange in a unit.
It is exchange in a unit.
Remove the four bosses and remove the net
assembly.
Notes: It will be good to use the tool with a flat tip, since it
is hard to remove. Please take care not to damage the
cabinet at this time.
Remove the six screws A attaching the speaker unit
to the cabinet.
Disconnect the code from the two terminals of the
speaker unit.
1.
2.
3.
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Front panel
Woofer (Bottom side)
One point
These slots are used.
Boss
Boss
Front panel
(inner side)
Net assembly
Speaker unit
Terminals
Speaker unit (reverse side)
The tool with
a flat tip
A
A
Code
Cabinet
Cabinet