JVC TH-A30 Instructions Manual Download Page 5

Page: 5 / 126

Parts Identification

Front Panel

See pages in the parentheses for details.

Display Window

Sound signal indicators (13, 15, 17, 20)
• PRO LOGIC, DOLBY DIGITAL, DTS,

and LINEAR PCM

TITLE indicator (28)

Tuner mode indicators (16, 47, 48)
• TUNED and ST (stereo)

PROGRAM indicator (34, 40, 48)

D I G I T A L

S U R R O U N D

D I G I T A L

STANDBY

AUDIO/FM MODE

DSP

VOLUME

SOURCE

DVD DIGITAL THEATER SYSTEM TH-A30

STANDBY/ON

See pages in the parentheses for details.

Front Panel

STANDBY/ON

button and STANDBY lamp (12 – 16)

AUDIO/FM MODE button (30, 41, 48)

Multi operation buttons
•

, and

Disc tray (12, 14)

(open/close) button (12 – 15, 35, 40, 44)

• Pressing this button also turns on the power and

changes the source to the DVD player.

Display window

Remote sensor

(play/pause) button (12, 13,14,15, 28, 44)

• Pressing this button also turns on the power and

changes the source to the DVD player.

DSP button (13, 15, 22, 25)

and – buttons (12, 15, 16)

SOURCE button (16, 17, 47, 48)

Illumination lamp (12 – 16)

DSP indicator (21, 25)

PBC (Play Back Control) indicator (37, 38)

Frequency unit indicators
• MHz (for FM station) and kHz (for AM station)

Audio channel indicators
• Indicates audio channels currently being played back.

Main display

Display Window

LFE

LINEAR PCM

TITLE

TUNED

PROGRAM

PBC MHz

kHz

DSP

Center Unit

EN01-10TH-A30[J]12.pm6

02.5.22, 7:25 PM

Summary of Contents for TH-A30































































































































Search results

Summary of Contents for TH-A30

Reviews:

JVC TH-A30, Instructions Manual, Page: 5 / 126

Search results

Summary of Contents for TH-A30

Reviews: