background image

English

– 5 –

INPUT 2

TO MAIN
SPEAKERS

(HIGH-LEVEL)

(LOW-LEVEL)

RIGHT

RIGHT

LEFT

RIGHT

LEFT

LEFT/MONO

MAX

VOLUME

50Hz

200Hz

MIN

CANCEL

ON

ON

OFF

REVERSE

NORMAL

FIXED

VARIABLE

INPUT 1

POWER

FREQUENCY

AUTO POWER ON/STANDBY

PHASE

CUT OFF FILTER

LINE OUT

L

R

(LOW-LEVEL)

RIGHT

LEFT/MONO

INPUT 1

Main (Front) Speakers
(not supplied)

Your Amplifier

SX-DW303

Your Amplifier

SX-DW303

Main (Front) Speakers
(not supplied)

Speaker cords
(not supplied)

 Connecting Method 

ı

Connect an amplifier having line output jacks to the INPUT 1
(LOW-LEVEL) terminal.

Preparation:

Purchase a stereo audio cord at
an audio shop or electric shop.

If your amplifier has only a monaural line output (MONO)
jack, connect it to the LEFT/MONO jack of the INPUT 1
(LOW-LEVEL) terminal (see Connecting Method 

Å

).

Stereo audio cord
(not supplied)

To an AC outlet

To an AC
outlet

Right speaker

Left speaker

How to connect the speaker cords:
1

Press and hold the clamp of the speaker terminal.

2

Insert the end of the speaker cord into the terminal as
illustrated below.
• Match the polarity of the speaker terminals: 

ª

 to 

ª

 and 

·

to 

·

.

3

Release the finger from the clamp.

• When you connect main (front) speakers to the TO MAIN

SPEAKERS terminal, use the speakers within the
impedance range indicated by the amplifier connected to
the INPUT 2 (HIGH-LEVEL) terminal. If not, the amplifier
connected to the INPUT 2 (HIGH-LEVEL) terminal may
malfunction and be damaged.

• DO NOT connect more than one speaker to one speaker

terminal.

 Connecting Method 

Ç

Connect an amplifier without a subwoofer output jack and line
output jacks to the INPUT 2 (HIGH-LEVEL) terminal.
• When this method is used, connect your main (front) speakers

to the TO MAIN SPEAKERS terminal on the rear of this unit.

Preparation:

Purchase speaker cords at an
audio shop or electric shop.

INPUT 2

TO MAIN
SPEAKERS

(HIGH-LEVEL)

(LOW-LEVEL)

RIGHT

RIGHT

LEFT

RIGHT

LEFT

LEFT/MONO

MAX

VOLUME

50Hz

200Hz

MIN

CANCEL

ON

ON

OFF

REVERSE

NORMAL

FIXED

VARIABLE

INPUT 1

POWER

FREQUENCY

AUTO POWER ON/STANDBY

PHASE

CUT OFF FILTER

RIGHT

LEFT

FRONT SPEAKERS

TO MAIN
SPEAKERS

INPUT 2

(HIGH-LEVEL)

RIGHT

LEFT

RIGHT

LEFT

Speaker cords
(not supplied)

1

2

3

EN_SX-DW303_f.p65

02.7.15, 0:53 PM

5

Summary of Contents for SX-DW303










Reviews: