JVC SR-VS30U Instructions Manual Download

Page: 31 / 84

Masterpage:Right-NoTitle0

Filename [VS30U_1a-EN.fm]

Page 31

January 31, 2002 3:35 pm

Manual Tracking

Your VCR is equipped with automatic tracking control. During
playback, you can override this and adjust the tracking manually
by pressing the

buttons.

Override automatic tracking.

Press

on the Remote.

Adjust the tracking manually.

Press

–

●

Press

again to return to automatic tracking.

NOTE:

When a new tape is inserted, the VCR enters the automatic
tracking mode automatically.

Soundtrack Selection

Your VCR is capable of recording three soundtracks (HI-FI L,
HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing

A. MONITOR

changes the soundtrack as follows:

●

You can also select the soundtrack on the VHS MODE SET
screen. (

墌

pg. 75, “AUDIO MONITOR”)

NOTES:

●

“HI-FI” should normally be selected. In this mode, Hi-Fi stereo
tapes are played back in stereo, and the normal audio track is
played back automatically for tapes with only normal audio.

●

“SUPERIMPOSE” must be set to “ON” or the on-screen
displays will not appear (

墌

pg. 71).

S-VHS

TRACK

USE

On-Screen Display

H I-F I

Hi-Fi sound is played back

H I-F I L

Sound on the left Hi-Fi channel is
played back

H I-F I R

Sound on the right Hi-Fi channel is
played back

NORM

Sound on the normal track is played
back

NORM
H I-F I

Both sounds on the Hi-Fi track and
normal track are mixed and played
back

VS30U_1a-EN.fm Page 31 Thursday, January 31, 2002 3:35 PM

Summary of Contents for SR-VS30U





















































































Search results

Summary of Contents for SR-VS30U

Reviews:

Related manuals for SR-VS30U

Brands by name

Popular brands

JVC SR-VS30U, Instructions Manual

Search results

Summary of Contents for SR-VS30U

Reviews:

Related manuals for SR-VS30U

Brands by name

Popular brands