72
EN
MULTI-BRAND REMOTE CONTROL (cont.)
When programed (set) with a manufacturer’s (brand’s)
code, this Remote can perform some of the remote
control functions of the listed DBS (Direct Broadcast
Satellite) receivers.
1
Turn on the DBS receiver
Turn on the DBS receiver using the Power button
on the DBS receiver or its Remote.
2
Set remote operation mode
Set the
VCR/TV/CABLE/DBS
selector to “CABLE/
DBS”.
3
Enter DBS receiver brand code
Follow the example shown below.
1
Press and hold
POWER
.
2
Press the
Number
keys to enter your DBS
receiver’s brand code by referring to the table
below.
3
Press
STOP
(
7
), and release
POWER
.
●
Once you have set the Remote to operate a
DBS receiver, you do not have to set it again
until you replace the Remote’s batteries.
4
Operate DBS receiver
Press one of the following buttons:
POWER
,
TV/
VCR CH +/–
, and
Number
keys.
●
For some brands, you must press
ENTER
after
having pressed the
Number
keys to enter a
channel number.
●
To change the DBS receiver’s channels, press
TV/VCR CH +/–
or the
Number
keys.
●
To operate the VCR, set the
VCR/TV/CABLE/
DBS
selector back to “VCR”.
NOTES:
●
Depending on the type of DBS receiver, some or all functions
cannot be operated using this Remote.
●
It is impossible to control a DBS receiver that does not have a
remote sensor.
●
It's not possible to set the Remote for both your DBS receiver
and a cable box at the same time. You can only set the
Remote to operate one of these units at a time.
DBS BRAND NAME
BRAND CODE
JVC (DISH Network)
51
ECHOSTAR (DISH Network)
51
SONY (DSS)
41
RCA (DSS)
40
(Ex.) To set the Remote to JVC 51:
Release
Hold
down
Press in succession
DBS Receiver
Brand Setting
POWER
JKL
. , ?
STOP
VCR
TV
CABLE
/DBS
2
4
TV/VCR
CH +/–
ENTER
3
-
1
,
3
4
3
-
3
3
-
2
4
Number keys
VD400U-EN66-73
03.7.18, 1:10 PM
72
