Masterpage:Right+
EN
59
Filename [SR-MV50U_10Editing.fm]
Page 59
November 22, 2004 1:03 pm
EDITING
Dubbing A Part Of A Cassette
You can dub the selected scenes on a tape to the DVD disc,
starting and stopping wherever you wish.
NOTES:
●
If you set the dubbing direction incorrectly, you could erase an
important recording that you wanted to dub. It is recommended to
conduct a test with unimportant cassettes first.
●
There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually starts.
●
The superimposed indication during the operation or dubbing is not
recorded.
●
It is not possible to dub a tape with a copy protection signal.
●
If the recording capacity of disc become full, the tape stops
automatically.
●
It is not possible to perform other operations like Live Memory
Playback. Check the recorded program on the disc after dubbing.
●
Dubbing is not possible on the discs used exclusively for On-Disc
Timer Programming.
●
When dubbing can not be performed properly, set “BLUE BACK” to
“OFF”. (
墌
pg. 72)
1
Press
VCR/DVD
repeatedly so that the VCR lamp lights up on
the unit.
2
Press
SET UP
to access the Main Menu screen.
3
Press
rt
to select “COPY SET”,
then press
ENTER
.
4
Press
rt
to select “COPY MODE”,
then press
ENTER
to select “FULL
COPY” or “1 PROG.”.
●
Pressing
ENTER
toggles the setting
between “FULL COPY” and “1 PROG.”.
5
Press
SET UP
to complete the
setting.
●
When “1 PROG.” is selected, recording
will stop when an index code or unrecorded portion is detected.
6
For VCR deck
Load a cassette you want to dub.
For DVD deck
Load a recordable disc.
7
Press
VCR
]
DVD
to select the dubbing direction.
8
Locate the point from where you want to start dubbing, then
pause playback by pressing the following buttons:
4
,
5
,
3
,
8
,
9
9
Prepare the DVD deck for dubbing.
A
Press
VCR/DVD
repeatedly so that the DVD lamp lights up on
the unit.
B
Press
REC MODE
repeatedly to set the recording mode.
C
Press
7
and
9
simultaneously so that the DVD deck enters the
Record Pause mode.
10
Press and hold
DUBB.
for more than 2 seconds to start
dubbing. The dubbing (DUBB.) lamp lights up on the unit.
11
Press
8
to stop recording on the DVD deck. Then press
VCR/
DVD
, and press
8
to stop playback on the VCR deck.
Manual Dubbing (From VCR To DVD)
●
Turn on the unit.
●
Turn on the TV and select the video channel (or AV mode).
●
Slide the
TV/CABLE/DBS/DVD
switch to
DVD
.
1
4
7
2
5
8
0
3
6
9
REC MODE
7
5
3
4
9
8
VCR/DVD
8
VCR
]
DVD
DUBB.
7
3
VCR/DVD
REC
MODE
U
5 9
DUBB. Lamp
PRESS ( , ) THEN (OK)
(SET UP) TO END
COPY SET
FUNCTION SET
MAIN MENU
( , ) THEN (ENTER)
(SET UP) TO END
COPY MODE
FULL COPY
FULL DISC
OFF
AUTO FINALIZE
OFF
COPY
SR-MV50US.book Page 59 Monday, November 22, 2004 1:03 PM
Summary of Contents for SR-MV50US
Page 88: ......