manualshive.com logo in svg

JVC SP-THS3F, Instructions Manual, Page: 88 / 172

Share
Download
JVC SP-THS3F Instructions Manual Download Page 88

G-1

Warnings, Cautions and Others/

/

CAUTION

To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.

.

CAUTION—

button!

(XV-THS3)

Disconnect the mains plug to shut the power off completely 
(the STANDBY lamp goes off).
The 

button in any position does not disconnect the mains 

line.
• When the system is on standby, the STANDBY lamp lights 

red.

• When the system is turned on, the STANDBY lamp goes off.
The power can be remote controlled.

CAUTION

• Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a 
newspaper or cloth, etc., the heat may not be able to get out.)

• Do not place any naked flame sources, such as lighted 

candles, on the apparatus.

• When discarding batteries, environmental problems must be 

considered and local rules or laws governing the disposal of 
these batteries must be followed strictly.

• Do not expose this apparatus to rain, moisture, dripping or 

splashing and that no objects filled with liquids, such as 
vases, shall be placed on the apparatus.

TH-S3[UX]SafetyCover.book  Page 1  Wednesday, May 19, 2004  5:35 PM

Summary of Contents for SP-THS3F













































































































































































Reviews:

No comments