JVC SP-THS3F Instructions Manual Download Page 75

Page: 75 / 172

Advanced operations

Repeating the current selection

For DVD VIDEO:
During playback
For VCD/SVCD:
During playback without PBC
function
For DVD AUDIO/CD/MP3/
JPEG/MPEG4:
During playback or stopped

When using the REPEAT button:

Press REPEAT.

Each time you press

REPEAT

, the Repeat mode changes.

NOTE

• For DVD VIDEO and DVD AUDIO, REPEAT ALL may not be

available depending on the disc.

When using the on-screen bar (except for MP3/
WMA/JPEG/MPEG4 disc):

Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

Press Cursor

to highlight

Press ENTER.

Press Cursor

repeatedly to select

the Repeat mode.

Press ENTER.

Press ON SCREEN.

The on-screen bar disappears.

To cancel Repeat Playback

Select “OFF” in step 4.

Repeating a desired part [A-B Repeat]

You can repeat playback of a
desired part by specifying the
beginning (point A) and
ending (point B).

During playback

When using the A-B RPT button:

Press A-B RPT at the beginning of the
part you want to repeat (point A).

The repeat mode indicator “

” appears on the display

window.

Press A-B RPT again at the end of the
part you want to repeat (point B).

The repeat mode indicator on the display window changes to
“

” and A-B Repeat Playback starts. The selected

part of the disc (between point A and B) is played repeatedly.

To cancel

Press

A-B RPT

during A-B Repeat Playback.

Repeat Playback

Display

window

TV screen

Meanings

Repeats the current group for
DVD AUDIO/MP3/WMA/
JPEG/MPEG4 disc.

REPEAT GROUP

Repeats the current title for
DVD VIDEO.

ALL

Repeats all tracks/files for
VCD/SVCD/CD/MP3/WMA/
JPEG/MPEG4 disc.

REPEAT ALL

Repeats the current track for
DVD AUDIO/VCD/SVCD/
CD/MP3/WMA/MPEG4 disc.

REPEAT TRACK,
REPEAT STEP

Repeats the current chapter for
DVD VIDEO.

REPEAT STEP

No
indication

Repeat mode is off.
The system plays back the disc
normally.

1 : 3 1 : 0 1

Repeat mode indicator

See page 20 for button locations.

TH-S3[UW].book Page 29 Tuesday, April 27, 2004 5:54 PM

Summary of Contents for SP-THS3F













































































































































































Search results

Summary of Contents for SP-THS3F

Reviews:

JVC SP-THS3F, Instructions Manual, Page: 75 / 172

Search results

Summary of Contents for SP-THS3F

Reviews: