TH-V70R
(No.21175)1-17
2.3.9 Removing the switch board (See Fig.15.)
• Remove the DVD mechanism assembly.
(1) From the top side of the CD mechanism assembly, remove
the screw
J
attaching the switch board.
(2) Lift the switch board slightly and then remove the wire from
connector CN101 on the switch board.
2.3.10 Removing the loading motor assembly (See Figs.3,
15 to 17.)
• Remove the DVD mechanism assembly.
(1) From the back side of the DVD mechanism assembly, dis-
connect the card wire from connector CN202 on the DVD
servo board. (See Fig.3.)
(2) From the top side of the CD mechanism assembly, remove
the two screws
K
attaching the clamper base assembly.
(3) Disconnect the wire from connector CN101 on the switch
board while lifting the clamper base assembly slightly and
remove the clamper base assembly.
(4) Remove the three screws
L
attaching the roller holder as-
sembly and take out the roller holder assembly.
(5) Disconnect the wires from connectors CN103 and CN104
on the loading motor assembly.
(6) Remove the belt of the loading motor assembly.
(7) Remove the two screws
M
attaching the loading motor as-
sembly and take out the loading motor assembly.
Fig.15
Fig.16
Fig.17
CD mechanism assembly
Clamper base assembly
Switch board
CN101
J
K
K
Roller holder
assembly
L
L
Belt
Loading motor assembly
CN103
CN104
M
M
Roller holder
assembly