TH-V70R
(No.21175)1-11
2.2.4 Removing the front board (See Figs. 17 to 20.)
(1) While widening section
e
of the front base in the direction
of the arrow, remove the rod gear assembly.
(2) Slide the moving panel assembly all the way in the direction
of the arrow.
(3) While slightly widening sections
f
toward the front, take out
the moving panel assembly in the direction of the arrow.
(4) Remove the two screws
U
attaching the moving base of the
moving panel assembly.
(5) Disengage the engagement sections
g
on the inside of the
moving base and at the inside of the moving panel assem-
bly and remove the moving base.
(6) Remove the two screws
V
attaching the front board.
(7) Disengage the claws
h
of the moving panel and remove the
front board.
Reference:
• Before attaching the moving base, pass the card wire
of the front board through the hole on the moving base.
(See Fig.19.)
Fig.17
Fig.18
Fig.19
Fig.20
Front panel assembly
(Back side)
Rod gear assembly
e
Front base
Front base
Moving panel assembly
f
U
g
g
Moving base
Hole
Card wire
V
Moving panel
Front board
h