KARAOKE operations
59
English
Resuming the masked vocal sound only
when you stop singing [VOCAL REPLACE]
You may have experiences that you
could not sing in the middle of
Karaoke because you forgot the
melody, etc. In such a case, use this function so that the masked
vocal sound automatically resumes to replace your voice when you
stop singing. It may be helpful for practicing Karaoke. Note that
this setting is applied only to the current disc.
7
During playback
1
Set “KARAOKE SOUND” to appropriate
sound option (channel). (
A
A
A
A
pg. 57)
• For “Multi-sound Karaoke” discs, select “1”, “2” or “1+2”
to select a channel that contains guide vocal.
• For normal audio discs, select “L+R”.
• For multiplex audio discs, select “L” or “R”.
When using the VOCAL button:
2
Press VOCAL.
The following pop-up window appears on the TV screen.
• Be sure to go to the next step within five seconds while the
pop-up window is displayed on the TV screen.
3
Press VOCAL repeatedly to select
“REPLACE”.
Each time you press
VOCAL
, vocal option changes as follows;
NORMAL
]
MASK
]
REPLACE
]
(back to the
beginning)
When using the Karaoke on-screen bar:
2
Press ON SCREEN.
The Karaoke on-screen bar appears on the TV screen.
3
Press Cursor
3
/
2
repeatedly to move
H
to “VOCAL”.
4
Press Cursor
/
/
5
repeatedly to select
“REPLACE”.
To resume normal playback
Select “NORMAL” in the procedure above.
You can add 3 types of sound effect
(ECHO, CHORUS, and FLANGER)
to your voice.
Adding an echo effect
When using the ECHO button:
1
Press ECHO.
The following pop-up window appears on the TV screen.
• Be sure to go to the next step within five seconds while the
pop-up window is displayed on the TV screen.
2
Press ECHO repeatedly to adjust the
effect level.
Each time you press
ECHO
, vocal option changes as follows;
OFF
]
1
]
2
]
3
]
(back to the beginning)
As the number increases, the effect will be emphasized.
(Normally set the level to “2”.)
When using the Karaoke on-screen bar:
1
Press ON SCREEN.
The Karaoke on-screen bar appears on the TV screen.
2
Press Cursor
3
/
2
repeatedly to move
H
to “ECHO”.
3
Press Cursor
/
/
5
repeatedly to adjust
the effect level.
To cancel the sound effect
Select “OFF” in the procedure above.
NOTE
• You cannot apply the echo effect and the CHORUS/FLANGER
effect (
A
pg. 60) at the same time to your voice.
Adding an effect to your
voice
TH-M65[US]-09Settings.fm Page 59 Thursday, June 26, 2003 5:00 PM
