(U-8)
7. Connect the cables to the connection pins CN302 (for 7-pin plug) and
CN202 (for 6-pin plug) on the DV I/O board section.
3. Installation (continued)
Clamps
Cables
Ferite core
Head phone
Phones
8. Fix the connected cables with clamps (3 points) as shown in the figure.
9. Re-install the board stopper and secure it.
10. Replace the top cover on the VCR and tighten the screws loosened in
procedure 1 to secure it.
11. Attach the ferrite core.
If you use headphones, attach the ferrite core, provided in the package, as
shown above.
(E-10)
— MEMO —